Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $334.93 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $334.93 fortnightly and receive your order now. More info
Throttle Body
Not only does our design out flow the OE by 17% at WOT (measured at 4” H2O restriction), the air flow in the 80% range of throttle blade opening is also dramatically improved, offering much smoother power delivery during spirited driving in the upper RPM range. This is achieved through careful engineering, billet construction and precision machining, allowing for smoother transitions, a thin leading edge and an aerodynamically improved design. The result of all this is more fully formed air passing through the throttle body into the intake manifold. Think of the wings of an airplane and how effortlessly the air passes around them. To address any performance concerns such as rough idling or check engine lights (CEL’s), aFe chose to use OEM electronics and gearing mechanism to ensure proper function and connectivity. Again, the 85mm throttle body does not require any custom tuning: it works well right out of the box. This is one of the simpler bolt on upgrades you can do to your car or truck. Simply loosen or remove the air intake tube and there are only 4 bolts and one electrical connector to remove. Install the BTB with the supplied hardware, re-attach your intake tube and that’s about it.
aFe POWER Throttle Body Ford Mustang GT 18-24 V8-5.0L
Ford Mustang GT 18-24 V8-5.0L
Fuel Injection Throttle Body
Throttle Body, Billet Throttle Body, 85mm Black Anodized, Drive-By-Wire, Ford, Each
Want to add some precious ponies to your 5.0 in less than an hour? If so, then aFe Power's new billet throttle bodies (BTB) fit the bill. These easy-to-install products will increase your Ford's power by a dyno-proven 17 hp and 15 lbs.-ft. of torque at 6,000 rpm! How did they accomplish this? The devil is in the details: increase the bore diameter without going so big that installation requires a lot of fabrication; redesign from the ground up to improve the airflow path; use materials that protect against galling (chafing); use OEM electronics and gearing mechanisms to ensure proper function and connectivity, preventing rough-idling and tripping of the check engine light. It all adds up to make aFe billet throttle bodies one of the simpler bolt-on upgrades you can do to your car or truck!
UPC | 802959468111 |
Brand | AFE Power |
Notes | Airflow is measured at 90 percent throttle opening. |
Quantity | Sold individually. |
Part Type | Throttle Bodies |
Product Line | aFe Billet Throttle Bodies |
Gaskets Included | No |
Venturi Quantity | 1 |
Hardware Included | Yes |
Airflow Rate (cfm) | 492 cfm |
IAC Motor Included | No |
Injectors Included | No |
TPS Sensor Included | No |
Throttle Body Style | Multi-port injection, MPI |
Throttle Body Finish | Black anodized |
Venturi Diameter (mm) | 85.00mm |
Throttle Body Material | Billet aluminum |
Throttle Body Actuation | Drive-By-Wire |
Manufacturer's Part Number | 46-39101 |
aFe 18-21 Ford Mustang GT 5.0L 85mm Billet Throttle Body | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2018-2020 | Ford | F-150 | XLT, XL, SSV, Lariat, King Ranch, Platinum | US |
2020-2023 | Ford | F-250 Super Duty | Platinum, XL, King Ranch, XLT, Lariat | US |
2020-2023 | Ford | F-350 Super Duty | Lariat, XL, Platinum, King Ranch, XLT | US |
2018-2023 | Ford | Mustang | GT, GT Premium, Bullitt, Mach 1 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Throttle Body
Not only does our design out flow the OE by 17% at WOT (measured at 4” H2O restriction), the air flow in the 80% range of throttle blade opening is also dramatically improved, offering much smoother power delivery during spirited driving in the upper RPM range. This is achieved through careful engineering, billet construction and precision machining, allowing for smoother transitions, a thin leading edge and an aerodynamically improved design. The result of all this is more fully formed air passing through the throttle body into the intake manifold. Think of the wings of an airplane and how effortlessly the air passes around them. To address any performance concerns such as rough idling or check engine lights (CEL’s), aFe chose to use OEM electronics and gearing mechanism to ensure proper function and connectivity. Again, the 85mm throttle body does not require any custom tuning: it works well right out of the box. This is one of the simpler bolt on upgrades you can do to your car or truck. Simply loosen or remove the air intake tube and there are only 4 bolts and one electrical connector to remove. Install the BTB with the supplied hardware, re-attach your intake tube and that’s about it.
aFe POWER Throttle Body Ford Mustang GT 18-24 V8-5.0L
Ford Mustang GT 18-24 V8-5.0L
Fuel Injection Throttle Body
Throttle Body, Billet Throttle Body, 85mm Black Anodized, Drive-By-Wire, Ford, Each
Want to add some precious ponies to your 5.0 in less than an hour? If so, then aFe Power's new billet throttle bodies (BTB) fit the bill. These easy-to-install products will increase your Ford's power by a dyno-proven 17 hp and 15 lbs.-ft. of torque at 6,000 rpm! How did they accomplish this? The devil is in the details: increase the bore diameter without going so big that installation requires a lot of fabrication; redesign from the ground up to improve the airflow path; use materials that protect against galling (chafing); use OEM electronics and gearing mechanisms to ensure proper function and connectivity, preventing rough-idling and tripping of the check engine light. It all adds up to make aFe billet throttle bodies one of the simpler bolt-on upgrades you can do to your car or truck!
UPC | 802959468111 |
Brand | AFE Power |
Notes | Airflow is measured at 90 percent throttle opening. |
Quantity | Sold individually. |
Part Type | Throttle Bodies |
Product Line | aFe Billet Throttle Bodies |
Gaskets Included | No |
Venturi Quantity | 1 |
Hardware Included | Yes |
Airflow Rate (cfm) | 492 cfm |
IAC Motor Included | No |
Injectors Included | No |
TPS Sensor Included | No |
Throttle Body Style | Multi-port injection, MPI |
Throttle Body Finish | Black anodized |
Venturi Diameter (mm) | 85.00mm |
Throttle Body Material | Billet aluminum |
Throttle Body Actuation | Drive-By-Wire |
Manufacturer's Part Number | 46-39101 |
aFe 18-21 Ford Mustang GT 5.0L 85mm Billet Throttle Body | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2018-2020 | Ford | F-150 | XLT, XL, SSV, Lariat, King Ranch, Platinum | US |
2020-2023 | Ford | F-250 Super Duty | Platinum, XL, King Ranch, XLT, Lariat | US |
2020-2023 | Ford | F-350 Super Duty | Lariat, XL, Platinum, King Ranch, XLT | US |
2018-2023 | Ford | Mustang | GT, GT Premium, Bullitt, Mach 1 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.