Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $183.34 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $183.34 fortnightly and receive your order now. More info
Magnum FORCE Intake
7" Tall Air Filter: This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet: Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet. Hassle-Free Installation: All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Magnum FORCE Stage-2 Cold Air Intake System w/ Pro 5R Filter BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
Available to Order
Air Intake, Magnum Force Stage 2 Pro 5R, BMW, 2.0L, Kit
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
Brand | AFE Power |
Manufacturer's Part Number | 54-12922-B |
Part Type | Air Intake Kits |
Product Line | aFe Magnum Force Stage 2 Pro 5R Air Intake Systems |
UPC | 802959506752 |
Air Filter Type | Oiled |
Tube Color | Black |
Tube Material | Plastic |
Filter Color | Blue |
Air Intake Filter Material | Cotton gauze |
Filter End Cap Color | Black |
Sleeve Color | Black |
Quantity | Sold as a kit. |
aFe Magnum FORCE Stage-2 Pro 5R Cold Air Intake System 2017 BMW 330i (F3x) L4-2.0L (t) B48 | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2017-2021 | BMW | 230i | Base | US |
2017-2021 | BMW | 230i xDrive | Base | US |
2017-2018 | BMW | 330i | Base | US |
2017-2019 | BMW | 330i GT xDrive | Base | US |
2017-2018 | BMW | 330i xDrive | Base | US |
2017-2020 | BMW | 430i | Base | US |
2017-2020 | BMW | 430i Gran Coupe | Base | US |
2017-2020 | BMW | 430i xDrive | Base | US |
2017-2020 | BMW | 430i xDrive Gran Coupe | Base | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | BMW |
Model | 230I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 230I XDRIVE |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 330I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Fuel Type: GAS, Manufacturer Body Code: F30 |
Magnum FORCE Intake
7" Tall Air Filter: This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet: Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet. Hassle-Free Installation: All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Magnum FORCE Stage-2 Cold Air Intake System w/ Pro 5R Filter BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
Available to Order
Air Intake, Magnum Force Stage 2 Pro 5R, BMW, 2.0L, Kit
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
Brand | AFE Power |
Manufacturer's Part Number | 54-12922-B |
Part Type | Air Intake Kits |
Product Line | aFe Magnum Force Stage 2 Pro 5R Air Intake Systems |
UPC | 802959506752 |
Air Filter Type | Oiled |
Tube Color | Black |
Tube Material | Plastic |
Filter Color | Blue |
Air Intake Filter Material | Cotton gauze |
Filter End Cap Color | Black |
Sleeve Color | Black |
Quantity | Sold as a kit. |
aFe Magnum FORCE Stage-2 Pro 5R Cold Air Intake System 2017 BMW 330i (F3x) L4-2.0L (t) B48 | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2017-2021 | BMW | 230i | Base | US |
2017-2021 | BMW | 230i xDrive | Base | US |
2017-2018 | BMW | 330i | Base | US |
2017-2019 | BMW | 330i GT xDrive | Base | US |
2017-2018 | BMW | 330i xDrive | Base | US |
2017-2020 | BMW | 430i | Base | US |
2017-2020 | BMW | 430i Gran Coupe | Base | US |
2017-2020 | BMW | 430i xDrive | Base | US |
2017-2020 | BMW | 430i xDrive Gran Coupe | Base | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | BMW |
Model | 230I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 230I XDRIVE |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 330I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Fuel Type: GAS, Manufacturer Body Code: F30 |