Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $203.12 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $203.12 fortnightly and receive your order now. More info
Magnum FORCE Intake
7" Tall "Oil Free" Air Filter: This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Carbon Fiber Look Cover w/ Auxiliary Air Inlet: This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet. Hassle-Free Installation: All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Filter BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
Available to Order
Air Intake Kit, Magnum Force Stage 2 Pro Dry S, Polyethylene Tube, Black, Synthetic Filter, Gray, BMW, 2.0L, Kit
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
UPC | 802959514658 |
Brand | AFE Power |
Notes | Intake cover has a carbon fiber look. Will not fit convertible models due to the factory strut brace. Fits models with B46/B48 engines only. |
Quantity | Sold as a kit. |
Part Type | Air Intake Kits |
Tube Color | Black |
Filter Color | Gray |
Product Line | aFe Magnum Force Stage 2 Pro Dry S Air Intake Systems |
Sleeve Color | Black |
Tube Material | Polyethylene |
Air Filter Type | Dry |
Filter End Cap Color | Black |
Air Intake Filter Material | Synthetic |
Manufacturer's Part Number | 51-12922-C |
aFe MagnumFORCE Intake Stage-2 Pro DRY S 2017 BMW 330i (F3x) L4-2.0L (t) B48 | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2017-2021 | BMW | 230i | Base | US |
2017-2021 | BMW | 230i xDrive | Base | US |
2017-2018 | BMW | 330i | Base | US |
2017-2019 | BMW | 330i GT xDrive | Base | US |
2017-2018 | BMW | 330i xDrive | Base | US |
2017-2020 | BMW | 430i | Base | US |
2017-2020 | BMW | 430i Gran Coupe | Base | US |
2017-2020 | BMW | 430i xDrive | Base | US |
2017-2020 | BMW | 430i xDrive Gran Coupe | Base | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | BMW |
Model | 230I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 230I XDRIVE |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 330I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Fuel Type: GAS, Manufacturer Body Code: F30 |
Magnum FORCE Intake
7" Tall "Oil Free" Air Filter: This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance. High Quality Tube: This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Carbon Fiber Look Cover w/ Auxiliary Air Inlet: This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet. Hassle-Free Installation: All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Magnum FORCE Stage-2 Cold Air Intake System w/ Pro DRY S Filter BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
BMW 330i/430i (F3X) 16-20 L4-2.0L (t) B46/B48
Available to Order
Air Intake Kit, Magnum Force Stage 2 Pro Dry S, Polyethylene Tube, Black, Synthetic Filter, Gray, BMW, 2.0L, Kit
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
UPC | 802959514658 |
Brand | AFE Power |
Notes | Intake cover has a carbon fiber look. Will not fit convertible models due to the factory strut brace. Fits models with B46/B48 engines only. |
Quantity | Sold as a kit. |
Part Type | Air Intake Kits |
Tube Color | Black |
Filter Color | Gray |
Product Line | aFe Magnum Force Stage 2 Pro Dry S Air Intake Systems |
Sleeve Color | Black |
Tube Material | Polyethylene |
Air Filter Type | Dry |
Filter End Cap Color | Black |
Air Intake Filter Material | Synthetic |
Manufacturer's Part Number | 51-12922-C |
aFe MagnumFORCE Intake Stage-2 Pro DRY S 2017 BMW 330i (F3x) L4-2.0L (t) B48 | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2017-2021 | BMW | 230i | Base | US |
2017-2021 | BMW | 230i xDrive | Base | US |
2017-2018 | BMW | 330i | Base | US |
2017-2019 | BMW | 330i GT xDrive | Base | US |
2017-2018 | BMW | 330i xDrive | Base | US |
2017-2020 | BMW | 430i | Base | US |
2017-2020 | BMW | 430i Gran Coupe | Base | US |
2017-2020 | BMW | 430i xDrive | Base | US |
2017-2020 | BMW | 430i xDrive Gran Coupe | Base | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | BMW |
Model | 230I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 230I XDRIVE |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Fuel Type: GAS, Manufacturer Body Code: F22 |
Universal | No |
Make | BMW |
Model | 330I |
Submodel | BASE |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | L4 |
Liter | 2.0 |
CC | 1998 |
CID | 122 |
Engine Family | BMW 4-cylinder |
Engine Size | 2.0L/1998cc |
Application Notes | Aspiration: Turbocharged, Fuel Type: GAS, Manufacturer Body Code: F30 |