Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $595.80 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $595.80 fortnightly and receive your order now. More info
Short Tube Header
Unleash more torque and horsepower from your Dodge or Chrysler 5.7L with this Twisted Steel series header. Made with 16-gauge 1-3/4" mandrel bent 304 stainless steel tubing and use 4 to 1 mitered merge collectors to eliminate flow-block turbulence. The result is unrestricted exhaust flow for overall performance gains of up to +9 HP and +10 lbs. x ft. torque on our in-house dyno. 100% hand MIG welded for quality, strength and durability, this system also features ball flange connection, retains factory 02 sensor locations and includes metal gaskets and hardware for hassle-free install. Performance Gains: In house dyno testing produced gains of up to +9 horsepower and +10 lbs. x ft. torque. Optimized Tube Lengths: Head tube lengths are optimized for true pulse control technology which improves flow and performance. Mitered Collectors: 4-to-1 mitered merge collectors decrease turbulence and increases exhaust velocity. The result is increased horsepower, torque and improved throttle response. Stainless Steel Construction: Mandrel bent 1-3/4" 16-gauge 304 stainless steel tubing increase exhaust velocity for noticeable torque and horsepower gains. Heavy Duty Flanges: 3/8" Thick, 1-piece flanges prevent warpage to ensure a leak-free seal over the life of the vehicle. MIG-Welded: 100% MIG-Welded by certified craftsmen provides the strongest welds reducing stress cracks for race proven strength and durability. Factory Mounting Locations: These headers retain your stock catalytic converters and factory 02 sensor locations for a direct bolt-on installation which requires no cutting or modifying. Hassle-Free Installation: Factory style metal header gaskets and all necessary hardware are included for a hassle-free installation.
Twisted Steel 304 Stainless Steel Short Tube Header Dodge Challenger/Charger 09-23 V8-5.7L
Dodge Challenger/Charger 09-23 V8-5.7L
Available to Order
Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, instrument clusters, and adjacent parts can vary between LHD and RHD configurations, but in many cases they are identical depending on the design of the vehicle and part. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.
Headers, Twisted Steel Header, 304 Stainless Steel, Shorty, Dodge, Pair
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
Brand | AFE Power |
Manufacturer's Part Number | 48-32021 |
Part Type | Headers |
Product Line | aFe Twisted Steel Headers |
UPC | 802959482537 |
Header Style | Shorty |
Header Material | 304 stainless steel |
Primary Tube Outside Diameter (in.) | 1 3/4 in. |
Header Color | Natural |
Flange Style | Standard |
Weld-Up | No |
Collector Attachment | 2-bolt flange |
Collector Reducers Included | No |
Tuned | Yes |
Flange Thickness (in.) | 0.38 in. |
Bolts/Studs Included | Yes |
Gaskets Included | Yes |
Crossover Pipe Included | No |
Catalytic Converter(s) Included | No |
Motor Mounts Included | No |
Transmission Mount Included | No |
Quantity | Sold as a pair. |
aFe Power Twisted Steel 304SS Shorty Header 09-18 Dodge Challenger / Charger V8-5.7L | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2023 | Chrysler | 300 | C, S, C Luxury, C Platinum, Limited | US |
2009-2023 | Dodge | Challenger | R/T, R/T Classic, R/T Plus, R/T Shaker, R/T Plus Shaker, T/A | US |
2007-2023 | Dodge | Charger | R/T, Pursuit, SE, R/T Road & Track, Daytona | US |
2005-2008 | Dodge | Magnum | R/T | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Short Tube Header
Unleash more torque and horsepower from your Dodge or Chrysler 5.7L with this Twisted Steel series header. Made with 16-gauge 1-3/4" mandrel bent 304 stainless steel tubing and use 4 to 1 mitered merge collectors to eliminate flow-block turbulence. The result is unrestricted exhaust flow for overall performance gains of up to +9 HP and +10 lbs. x ft. torque on our in-house dyno. 100% hand MIG welded for quality, strength and durability, this system also features ball flange connection, retains factory 02 sensor locations and includes metal gaskets and hardware for hassle-free install. Performance Gains: In house dyno testing produced gains of up to +9 horsepower and +10 lbs. x ft. torque. Optimized Tube Lengths: Head tube lengths are optimized for true pulse control technology which improves flow and performance. Mitered Collectors: 4-to-1 mitered merge collectors decrease turbulence and increases exhaust velocity. The result is increased horsepower, torque and improved throttle response. Stainless Steel Construction: Mandrel bent 1-3/4" 16-gauge 304 stainless steel tubing increase exhaust velocity for noticeable torque and horsepower gains. Heavy Duty Flanges: 3/8" Thick, 1-piece flanges prevent warpage to ensure a leak-free seal over the life of the vehicle. MIG-Welded: 100% MIG-Welded by certified craftsmen provides the strongest welds reducing stress cracks for race proven strength and durability. Factory Mounting Locations: These headers retain your stock catalytic converters and factory 02 sensor locations for a direct bolt-on installation which requires no cutting or modifying. Hassle-Free Installation: Factory style metal header gaskets and all necessary hardware are included for a hassle-free installation.
Twisted Steel 304 Stainless Steel Short Tube Header Dodge Challenger/Charger 09-23 V8-5.7L
Dodge Challenger/Charger 09-23 V8-5.7L
Available to Order
Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, instrument clusters, and adjacent parts can vary between LHD and RHD configurations, but in many cases they are identical depending on the design of the vehicle and part. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.
Headers, Twisted Steel Header, 304 Stainless Steel, Shorty, Dodge, Pair
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
Brand | AFE Power |
Manufacturer's Part Number | 48-32021 |
Part Type | Headers |
Product Line | aFe Twisted Steel Headers |
UPC | 802959482537 |
Header Style | Shorty |
Header Material | 304 stainless steel |
Primary Tube Outside Diameter (in.) | 1 3/4 in. |
Header Color | Natural |
Flange Style | Standard |
Weld-Up | No |
Collector Attachment | 2-bolt flange |
Collector Reducers Included | No |
Tuned | Yes |
Flange Thickness (in.) | 0.38 in. |
Bolts/Studs Included | Yes |
Gaskets Included | Yes |
Crossover Pipe Included | No |
Catalytic Converter(s) Included | No |
Motor Mounts Included | No |
Transmission Mount Included | No |
Quantity | Sold as a pair. |
aFe Power Twisted Steel 304SS Shorty Header 09-18 Dodge Challenger / Charger V8-5.7L | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2023 | Chrysler | 300 | C, S, C Luxury, C Platinum, Limited | US |
2009-2023 | Dodge | Challenger | R/T, R/T Classic, R/T Plus, R/T Shaker, R/T Plus Shaker, T/A | US |
2007-2023 | Dodge | Charger | R/T, Pursuit, SE, R/T Road & Track, Daytona | US |
2005-2008 | Dodge | Magnum | R/T | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.