Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $382.14 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $382.14 fortnightly and receive your order now. More info
Cat-Back Exhaust
aFe's all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2" mandrel bent, aluminized steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory exhaust. This 3-piece designed cat-back system utilizes a less-restricting, baffled muffler to improve your FJ's performance while maintaining a deep, smooth tone. 100% hand MIG-welded by certified craftsmen for proven quality and durability, the Scorpion exhaust system includes a black, high-temp powder coated 4 ½" tip to give your FJ a clean, finished look. Flow and Performance This Scorpion Series exhaust system is constructed of 2-1/2" mandrel bent aluminized steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: 18" less restrictive, ba ffled muffler absorbs high pitch tones producing a powerful, aggressive, smooth tone under load and features an anti-corrosion protective coating. 4-1/2" dia. Stainless Steel Exhaust Tip: This exhaust system is finished off with a 4-1/2" dia. high-temp stainless steel exhaust tip that gives your FJ Cruiser a stylish, finished look. Leak-Free Seal: High quality band clamps and hardware are used for a complete 360-degree sealing surface. Perfect Fit: OE-style bayonet hangers are used to maintain a stable exhaust pipe location during any driving conditions. The bayonet tip holds the hanger bushin g in place for a long-lasting, OE-style fit. This makes for an easy installation with no cutting required.
Scorpion 2-1/2 IN Aluminized Steel Cat-Back Exhaust System w/ Black Tip Toyota FJ Cruiser 07-18 V6-4.0L
Toyota FJ Cruiser 07-18 V6-4.0L
Available to Order
Exhaust System, Scorpion, Cat-back, Single, Steel, Aluminized, Toyota, 4.0L, Kit
aFe Scorpion exhaust systems have the features and components to make your vehicle's performance "stunning". The smooth curves of mandrel-bent aluminized steel tubing and free-flowing mufflers remove restrictions for increased horsepower, torque, and throttle response, as well as delivering a deep aggressive sound. Scorpion systems include OE-style bayonet hangers, band clamps, and all necessary hardware for hassle-free, leak-free installation. aFe also offers options of black or polished tips, or their Hi-Tuck tips that are designed for long-travel clearance, along with greater approach and departure angles.
UPC | 802959610237 |
Brand | AFE Power |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Black powdercoated |
Exhaust Type | Single |
Product Line | aFe Scorpion Exhaust Systems |
System Style | Cat-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Passenger side |
Muffler Style | Baffled |
System Finish | Aluminized |
Inlet Quantity | 1 |
Muffler Finish | Aluminized |
Tip Edge Style | Rolled edge |
System Material | Steel |
Muffler Included | Yes |
Muffler Material | Steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.50 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 49-06039-B |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
aFe Scorpion 2-1/2in Aluminized Steel Cat-Back Exhaust w/ Black Tips 07-17 Toyota FJ Cruiser V6 4.0L | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2007-2014 | Toyota | FJ Cruiser | Base, TRD Special Edition, Trail Teams Special Edition | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | TOYOTA |
Model | FJ CRUISER |
Submodel | BASE |
Beginning Year | 2007 |
Ending Year | 2014 |
Engine Type | V6 |
Liter | 4.0 |
CID | 241 |
CC | 3956 |
Engine Size | 4.0L/3956cc |
Engine Family | Toyota V6 |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | 4WD |
Application Notes | Fuel Type: GAS. Must Remove Rear Skid Plate on TRD Models |
Universal | No |
Make | TOYOTA |
Model | FJ CRUISER |
Submodel | BASE |
Beginning Year | 2007 |
Ending Year | 2014 |
Engine Type | V6 |
Liter | 4.0 |
CID | 241 |
CC | 3956 |
Engine Size | 4.0L/3956cc |
Engine Family | Toyota V6 |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | Fuel Type: GAS. Must Remove Rear Skid Plate on TRD Models |
Universal | No |
Make | TOYOTA |
Model | FJ CRUISER |
Submodel | BASE |
Beginning Year | 2007 |
Ending Year | 2014 |
Engine Type | V6 |
Liter | 4.0 |
CID | 241 |
CC | 3956 |
Engine Size | 4.0L/3956cc |
Engine Family | Toyota V6 |
Body Style | Sport Utility |
Transmission | Manual |
Drivetrain | 4WD |
Application Notes | Fuel Type: GAS. Must Remove Rear Skid Plate on TRD Models |
Cat-Back Exhaust
aFe's all new Scorpion series cat-back exhaust system for your 2007- 2017 Toyota FJ Cruiser with the V6-4.0L engine will get you there with speed and style. Designed from 2-1/2" mandrel bent, aluminized steel, this exhaust system offers greater flow to deliver more torque and horsepower than the factory exhaust. This 3-piece designed cat-back system utilizes a less-restricting, baffled muffler to improve your FJ's performance while maintaining a deep, smooth tone. 100% hand MIG-welded by certified craftsmen for proven quality and durability, the Scorpion exhaust system includes a black, high-temp powder coated 4 ½" tip to give your FJ a clean, finished look. Flow and Performance This Scorpion Series exhaust system is constructed of 2-1/2" mandrel bent aluminized steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: 18" less restrictive, ba ffled muffler absorbs high pitch tones producing a powerful, aggressive, smooth tone under load and features an anti-corrosion protective coating. 4-1/2" dia. Stainless Steel Exhaust Tip: This exhaust system is finished off with a 4-1/2" dia. high-temp stainless steel exhaust tip that gives your FJ Cruiser a stylish, finished look. Leak-Free Seal: High quality band clamps and hardware are used for a complete 360-degree sealing surface. Perfect Fit: OE-style bayonet hangers are used to maintain a stable exhaust pipe location during any driving conditions. The bayonet tip holds the hanger bushin g in place for a long-lasting, OE-style fit. This makes for an easy installation with no cutting required.
Scorpion 2-1/2 IN Aluminized Steel Cat-Back Exhaust System w/ Black Tip Toyota FJ Cruiser 07-18 V6-4.0L
Toyota FJ Cruiser 07-18 V6-4.0L
Available to Order
Exhaust System, Scorpion, Cat-back, Single, Steel, Aluminized, Toyota, 4.0L, Kit
aFe Scorpion exhaust systems have the features and components to make your vehicle's performance "stunning". The smooth curves of mandrel-bent aluminized steel tubing and free-flowing mufflers remove restrictions for increased horsepower, torque, and throttle response, as well as delivering a deep aggressive sound. Scorpion systems include OE-style bayonet hangers, band clamps, and all necessary hardware for hassle-free, leak-free installation. aFe also offers options of black or polished tips, or their Hi-Tuck tips that are designed for long-travel clearance, along with greater approach and departure angles.
UPC | 802959610237 |
Brand | AFE Power |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Black powdercoated |
Exhaust Type | Single |
Product Line | aFe Scorpion Exhaust Systems |
System Style | Cat-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Passenger side |
Muffler Style | Baffled |
System Finish | Aluminized |
Inlet Quantity | 1 |
Muffler Finish | Aluminized |
Tip Edge Style | Rolled edge |
System Material | Steel |
Muffler Included | Yes |
Muffler Material | Steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.50 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 49-06039-B |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
aFe Scorpion 2-1/2in Aluminized Steel Cat-Back Exhaust w/ Black Tips 07-17 Toyota FJ Cruiser V6 4.0L | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2007-2014 | Toyota | FJ Cruiser | Base, TRD Special Edition, Trail Teams Special Edition | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | TOYOTA |
Model | FJ CRUISER |
Submodel | BASE |
Beginning Year | 2007 |
Ending Year | 2014 |
Engine Type | V6 |
Liter | 4.0 |
CID | 241 |
CC | 3956 |
Engine Size | 4.0L/3956cc |
Engine Family | Toyota V6 |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | 4WD |
Application Notes | Fuel Type: GAS. Must Remove Rear Skid Plate on TRD Models |
Universal | No |
Make | TOYOTA |
Model | FJ CRUISER |
Submodel | BASE |
Beginning Year | 2007 |
Ending Year | 2014 |
Engine Type | V6 |
Liter | 4.0 |
CID | 241 |
CC | 3956 |
Engine Size | 4.0L/3956cc |
Engine Family | Toyota V6 |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | Fuel Type: GAS. Must Remove Rear Skid Plate on TRD Models |
Universal | No |
Make | TOYOTA |
Model | FJ CRUISER |
Submodel | BASE |
Beginning Year | 2007 |
Ending Year | 2014 |
Engine Type | V6 |
Liter | 4.0 |
CID | 241 |
CC | 3956 |
Engine Size | 4.0L/3956cc |
Engine Family | Toyota V6 |
Body Style | Sport Utility |
Transmission | Manual |
Drivetrain | 4WD |
Application Notes | Fuel Type: GAS. Must Remove Rear Skid Plate on TRD Models |