Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $880.60 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $880.60 fortnightly and receive your order now. More info
Performance Exhaust
During development of AWE high horsepower turbos kits for the 997TT, AWE experienced excessively high intake air temperatures. Upon close examination of the stock intercoolers, AWE found they matched the same specs as the 996TT X50/GT2 design, which is suitable to 600hp, but not much beyond that. Since an OEM option was not available, and AWE power goals were well north of 700hp, AWE undertook the task to construct a completely new intercooler system. Compared to stock, AWE cores are 37% larger (422 cubic inches vs 308 cubic inches). In contrast to the stock cores, AWE are a high flow bar and plate style and are built to our charge row and fin count specs. These specifications resulted in improved intake temperatures by a massive 55F and improved drop pressure resistance through the core by 1 psi. Considering that extremely little trimming is involved to fit such effective units to the car, this is a huge engineering feat. In addition to the superior core and end tank design, the AWE kit also features 6-ply silicone hoses with gentle curves to prevent bursting under pressure. They are attached to the intake and turbos by stainless steel high force t-bolt clamps, and a molded lip is integrated where the hoses meet the turbos to imitate the factory locking mechanism. Further, AWE hoses use a Nomex braiding for superior strength, instead of more common polyester. The very best materials and industry-leading engineering separate this kit from all others on the market. Whether you are simply running enhanced software, or are planning on a larger turbo upgrade for your car, AWE intercoolers solve all heat-related issues that come with more turbo boost. Keeping your intake air temperatures low results in more power, better engine output stability when outside temps climb, and the safety margin needed when pushing the limit. Please note, the AWE Performance Intercooler is for racing use only.
Performance Intercoolers for Porsche 997 Turbo / GT2 - Black Hoses
AWE Tuning Performance intercoolers are 37 percent larger than stock. The high-flow bar and plate style aluminum units have resulted in intake temperatures reduced by up to 55 degrees F and improved drop pressure resistance through the core. If your engine runs hot, tackle the high intake air temps with a Performance intercooler. Drivers have experience double-digit gains in horsepower and torque! Order the model recommended for your vehicle. Additional product details: * Forced induction * Perfect fitment, guaranteed * No cutting or grinding of car or brackets * Some models include silicon intercooler pipe * Mounting brackets included * Fits securely behind stock crash bar
Brand | AWE Tuning |
Manufacturer's Part Number | 4510-11046 |
Part Type | Intercoolers |
Product Line | AWE Tuning Performance Intercoolers |
UPC | 00810098800471 |
Intercooler Core Type | Air-to-air |
Intercooler Material | Aluminum |
Intercooler Color | Natural |
Intercooler Mounting Brackets Included | Yes |
Intercooler Pipe Included | Yes |
Intercooler Pipe Material | Silicon |
Intercooler Pipe Color | Black |
Aftercooler Included | No |
Aftercooler Remote Water Reservoir Included | No |
Remote Mount Electric Water Pump Included | No |
Quantity | Sold as a kit. |
AWE Tuning 997TT/GT2 Performance Intercoolers - Black Hoses | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2007-2009 | Porsche | 911 | Turbo, GT2 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | PORSCHE |
Model | 911 |
Submodel | GT2 |
Beginning Year | 2008 |
Ending Year | 2009 |
Engine Type | H6 |
Liter | 3.6 |
CC | 3596 |
Engine Family | Porsche 6-cylinder |
Engine Size | 3.6L/3596cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Drive Type: RWD, Transmission Control Type: Manual |
Universal | No |
Make | PORSCHE |
Model | 911 |
Submodel | TURBO |
Beginning Year | 2007 |
Ending Year | 2009 |
Engine Type | H6 |
Liter | 3.6 |
CC | 3596 |
Engine Family | Porsche 6-cylinder |
Engine Size | 3.6L/3596cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Drive Type: AWD, Transmission Control Type: Automatic |
Universal | No |
Make | PORSCHE |
Model | 911 |
Submodel | TURBO |
Beginning Year | 2007 |
Ending Year | 2009 |
Engine Type | H6 |
Liter | 3.6 |
CC | 3596 |
Engine Family | Porsche 6-cylinder |
Engine Size | 3.6L/3596cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Drive Type: AWD, Transmission Control Type: Manual |
Performance Exhaust
During development of AWE high horsepower turbos kits for the 997TT, AWE experienced excessively high intake air temperatures. Upon close examination of the stock intercoolers, AWE found they matched the same specs as the 996TT X50/GT2 design, which is suitable to 600hp, but not much beyond that. Since an OEM option was not available, and AWE power goals were well north of 700hp, AWE undertook the task to construct a completely new intercooler system. Compared to stock, AWE cores are 37% larger (422 cubic inches vs 308 cubic inches). In contrast to the stock cores, AWE are a high flow bar and plate style and are built to our charge row and fin count specs. These specifications resulted in improved intake temperatures by a massive 55F and improved drop pressure resistance through the core by 1 psi. Considering that extremely little trimming is involved to fit such effective units to the car, this is a huge engineering feat. In addition to the superior core and end tank design, the AWE kit also features 6-ply silicone hoses with gentle curves to prevent bursting under pressure. They are attached to the intake and turbos by stainless steel high force t-bolt clamps, and a molded lip is integrated where the hoses meet the turbos to imitate the factory locking mechanism. Further, AWE hoses use a Nomex braiding for superior strength, instead of more common polyester. The very best materials and industry-leading engineering separate this kit from all others on the market. Whether you are simply running enhanced software, or are planning on a larger turbo upgrade for your car, AWE intercoolers solve all heat-related issues that come with more turbo boost. Keeping your intake air temperatures low results in more power, better engine output stability when outside temps climb, and the safety margin needed when pushing the limit. Please note, the AWE Performance Intercooler is for racing use only.
Performance Intercoolers for Porsche 997 Turbo / GT2 - Black Hoses
AWE Tuning Performance intercoolers are 37 percent larger than stock. The high-flow bar and plate style aluminum units have resulted in intake temperatures reduced by up to 55 degrees F and improved drop pressure resistance through the core. If your engine runs hot, tackle the high intake air temps with a Performance intercooler. Drivers have experience double-digit gains in horsepower and torque! Order the model recommended for your vehicle. Additional product details: * Forced induction * Perfect fitment, guaranteed * No cutting or grinding of car or brackets * Some models include silicon intercooler pipe * Mounting brackets included * Fits securely behind stock crash bar
Brand | AWE Tuning |
Manufacturer's Part Number | 4510-11046 |
Part Type | Intercoolers |
Product Line | AWE Tuning Performance Intercoolers |
UPC | 00810098800471 |
Intercooler Core Type | Air-to-air |
Intercooler Material | Aluminum |
Intercooler Color | Natural |
Intercooler Mounting Brackets Included | Yes |
Intercooler Pipe Included | Yes |
Intercooler Pipe Material | Silicon |
Intercooler Pipe Color | Black |
Aftercooler Included | No |
Aftercooler Remote Water Reservoir Included | No |
Remote Mount Electric Water Pump Included | No |
Quantity | Sold as a kit. |
AWE Tuning 997TT/GT2 Performance Intercoolers - Black Hoses | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2007-2009 | Porsche | 911 | Turbo, GT2 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | PORSCHE |
Model | 911 |
Submodel | GT2 |
Beginning Year | 2008 |
Ending Year | 2009 |
Engine Type | H6 |
Liter | 3.6 |
CC | 3596 |
Engine Family | Porsche 6-cylinder |
Engine Size | 3.6L/3596cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Drive Type: RWD, Transmission Control Type: Manual |
Universal | No |
Make | PORSCHE |
Model | 911 |
Submodel | TURBO |
Beginning Year | 2007 |
Ending Year | 2009 |
Engine Type | H6 |
Liter | 3.6 |
CC | 3596 |
Engine Family | Porsche 6-cylinder |
Engine Size | 3.6L/3596cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Drive Type: AWD, Transmission Control Type: Automatic |
Universal | No |
Make | PORSCHE |
Model | 911 |
Submodel | TURBO |
Beginning Year | 2007 |
Ending Year | 2009 |
Engine Type | H6 |
Liter | 3.6 |
CC | 3596 |
Engine Family | Porsche 6-cylinder |
Engine Size | 3.6L/3596cc |
Application Notes | Aspiration: Turbocharged, Body Type: Coupe, Drive Type: AWD, Transmission Control Type: Manual |