Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $123.30 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $123.30 fortnightly and receive your order now. More info
Rear Cradle Lockout
Reduce Wheelhop, bushing deflection, and cradle movement on your 2016-newer Chevrolet Camaro with a Cradle Bushing Lockout Kit from BMR Suspension. Built from CNC-machines Delrin, laser-cut stainless steel, and billet aluminum, BMR?s BK063 Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR?s BK063?s Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum ?bullet? inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. By filling the voids in the bushings, deflection is greatly reduced, allowing more power and torque to be transferred to the ground instead of being absorbed by the chassis. BMR Suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR?s testing, no change in NVH was observed without accompanying modifications.) BMR Suspension?s BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement. Throughout testing, BMR has seen about an 80%-90% reduction in fore/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn?t driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection.
This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH.
Suspension Subframe Bushing Kit
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Cradle Bushings, Rear, Delrin, Black, with Lock Out, Chevrolet, Kit
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
UPC | 887753322043 |
Brand | BMR Suspension |
Quantity | Sold as a kit. |
Part Type | Subframe and Cradle Bushings and Inserts |
Product Line | BMR Cradle Bushing Lockout Kits |
Bushing Color | Black |
Bushing Material | Delrin® |
Manufacturer's Part Number | BK063 |
BMR 16-17 6th Gen Camaro Rear Cradle Lockout Bushing Kit - Black | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2016-2020 | Chevrolet | Camaro | SS, LT, ZL1, LS, LT1 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year or regional revisions. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2017 |
Ending Year | 2022 |
Engine Type | L4 |
Drivetrain | RWD |
Engine Family | GM 4-cylinder |
Engine Size | 2.0L/122 |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT1 |
Beginning Year | 2020 |
Ending Year | 2022 |
Engine Type | V8 |
Drivetrain | RWD |
Engine Family | Chevy small block Gen V |
Engine Size | 6.2L/376 |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2016 |
Ending Year | 2022 |
Engine Type | L4 |
Drivetrain | RWD |
Engine Family | GM 4-cylinder |
Engine Size | 2.0L/122 |
Rear Cradle Lockout
Reduce Wheelhop, bushing deflection, and cradle movement on your 2016-newer Chevrolet Camaro with a Cradle Bushing Lockout Kit from BMR Suspension. Built from CNC-machines Delrin, laser-cut stainless steel, and billet aluminum, BMR?s BK063 Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. BMR?s BK063?s Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum ?bullet? inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. By filling the voids in the bushings, deflection is greatly reduced, allowing more power and torque to be transferred to the ground instead of being absorbed by the chassis. BMR Suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR?s testing, no change in NVH was observed without accompanying modifications.) BMR Suspension?s BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement. Throughout testing, BMR has seen about an 80%-90% reduction in fore/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn?t driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection.
This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH.
Suspension Subframe Bushing Kit
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Cradle Bushings, Rear, Delrin, Black, with Lock Out, Chevrolet, Kit
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
UPC | 887753322043 |
Brand | BMR Suspension |
Quantity | Sold as a kit. |
Part Type | Subframe and Cradle Bushings and Inserts |
Product Line | BMR Cradle Bushing Lockout Kits |
Bushing Color | Black |
Bushing Material | Delrin® |
Manufacturer's Part Number | BK063 |
BMR 16-17 6th Gen Camaro Rear Cradle Lockout Bushing Kit - Black | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2016-2020 | Chevrolet | Camaro | SS, LT, ZL1, LS, LT1 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year or regional revisions. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2017 |
Ending Year | 2022 |
Engine Type | L4 |
Drivetrain | RWD |
Engine Family | GM 4-cylinder |
Engine Size | 2.0L/122 |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT1 |
Beginning Year | 2020 |
Ending Year | 2022 |
Engine Type | V8 |
Drivetrain | RWD |
Engine Family | Chevy small block Gen V |
Engine Size | 6.2L/376 |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2016 |
Ending Year | 2022 |
Engine Type | L4 |
Drivetrain | RWD |
Engine Family | GM 4-cylinder |
Engine Size | 2.0L/122 |