![AfterPay](/assets/themes/2024-06-streamin/img/afterpay-logo.png?1725406900)
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $272.41 fortnightly and receive your order now. More info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $272.41 fortnightly and receive your order now. More info
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB030 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 29mm DOM tubing, the SB030 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB030 sway bar kit for street performance, autocross, and road race applications.
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
Brand | BMR Suspension |
Manufacturer's Part Number | SB030H |
Part Type | Sway Bars |
Product Line | BMR Sway Bars |
Summit Racing Part Number | BMR-SB030H |
UPC | 887753326119 |
Sway Bar Position | Front and Rear |
Front Sway Bar Type | Hollow |
Front Sway Bar Adjustable | 3-position |
Rear Sway Bar Type | Hollow |
Rear Sway Bar Adjustable | 3-position |
Front Sway Bar Diameter (in.) | 1.125 in. |
Front Sway Bar Diameter (mm) | 29.00 mm |
Rear Sway Bar Diameter (in.) | 1.000 in. |
Rear Sway Bar Diameter (mm) | 25.00 mm |
Mounting Hardware Included | Yes |
Sway Bar Color | Black |
Sway Bar Material | Steel |
Quantity | Sold as a set. |
Notes | Includes polyurethane bushings. |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2010 |
Ending Year | 2010 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Drivetrain | RWD |
Engine Family | GM V6 |
Engine Size | 3.6L/217 |
Application Notes | Front_Rear |
Engine VIN Code | V |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2011 |
Ending Year | 2011 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Drivetrain | RWD |
Engine Family | GM V6 |
Engine Size | 3.6L/217 |
Application Notes | Front_Rear |
Engine VIN Code | D |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2012 |
Ending Year | 2012 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Drivetrain | RWD |
Engine Family | GM V6 |
Engine Size | 3.6L/217 |
Application Notes | Front_Rear |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2010 |
BMR 10-11 Chevrolet Camero Front and Rear Sway Bar Kit w/ Bushings - Black Hammertone | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2010 | Chevrolet | Camaro | LT | US |
2010 | Chevrolet | Camaro | LS | US |
2010 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | LS | US |
2011 | Chevrolet | Camaro | LT | US |
2012 | Chevrolet | Camaro | SS | US |
2012 | Chevrolet | Camaro | LS | US |
2012 | Chevrolet | Camaro | LT | US |
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspension?s SB030 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 29mm DOM tubing, the SB030 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. The sway bar is 3-way adjustable to tune the amount of torsional spring rate and to determine the handling characteristics (understeer/oversteer) of the vehicle.
BMR Suspension designed the SB030 sway bar kit for street performance, autocross, and road race applications.
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
BMR sway bars are the most significant handling upgrade you can make to your vehicle. With hand tools and about an hour or so of your time, BMR sway bars will deliver the most noticeable handling improvement to your ride. BMR chooses to cold form their tubular sway bars instead of the conventional hot formed process. For you that means better resistance to torsional fatigue, more consistent "memory" retention, and money well spent for lasting performance and driving enjoyment. BMR put countless hours into developing and testing the ideal rates for their bars, so feel their passion for perfection by installing one of their sway bar kits--you're in control with BMR Suspension.
Brand | BMR Suspension |
Manufacturer's Part Number | SB030H |
Part Type | Sway Bars |
Product Line | BMR Sway Bars |
Summit Racing Part Number | BMR-SB030H |
UPC | 887753326119 |
Sway Bar Position | Front and Rear |
Front Sway Bar Type | Hollow |
Front Sway Bar Adjustable | 3-position |
Rear Sway Bar Type | Hollow |
Rear Sway Bar Adjustable | 3-position |
Front Sway Bar Diameter (in.) | 1.125 in. |
Front Sway Bar Diameter (mm) | 29.00 mm |
Rear Sway Bar Diameter (in.) | 1.000 in. |
Rear Sway Bar Diameter (mm) | 25.00 mm |
Mounting Hardware Included | Yes |
Sway Bar Color | Black |
Sway Bar Material | Steel |
Quantity | Sold as a set. |
Notes | Includes polyurethane bushings. |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2010 |
Ending Year | 2010 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Drivetrain | RWD |
Engine Family | GM V6 |
Engine Size | 3.6L/217 |
Application Notes | Front_Rear |
Engine VIN Code | V |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2011 |
Ending Year | 2011 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Drivetrain | RWD |
Engine Family | GM V6 |
Engine Size | 3.6L/217 |
Application Notes | Front_Rear |
Engine VIN Code | D |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2012 |
Ending Year | 2012 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Drivetrain | RWD |
Engine Family | GM V6 |
Engine Size | 3.6L/217 |
Application Notes | Front_Rear |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2010 |
BMR 10-11 Chevrolet Camero Front and Rear Sway Bar Kit w/ Bushings - Black Hammertone | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2010 | Chevrolet | Camaro | LT | US |
2010 | Chevrolet | Camaro | LS | US |
2010 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | LS | US |
2011 | Chevrolet | Camaro | LT | US |
2012 | Chevrolet | Camaro | SS | US |
2012 | Chevrolet | Camaro | LS | US |
2012 | Chevrolet | Camaro | LT | US |