Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $609.74 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $609.74 fortnightly and receive your order now. More info
Axle-Back System
This system is for vehicles that come from the factory with single tips and are NOT equipped with Dual Mode Exhaust (NPP) valves. This system features 4.5" polished T-304 stainless steel tips. BORLA(r) Cat-Back(tm) & Axle-back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(r) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
S-Type Axle-Back Exhaust System 2016-2023 Chevrolet Camaro LT 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Single Split Rear Exit WITHOUT Dual Mode Exhaust (NPP) Valves.
2016-2023 Chevrolet Camaro LT 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Single Split Rear Exit WITHOUT Dual Mode Exhaust (NPP) Valves.
Exhaust System Kit
Exhaust System, Chevy, Axle-Back, Polished Tips, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422219280 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.50 |
Tailpipe Diameter (in.) | 2.75 in. |
Manufacturer's Part Number | 11928 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 16-17 Chevy Camaro 3.6L V6 Single Split Rear Exit S-Type Axle-Back Exhaust | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2016-2023 | Chevrolet | Camaro | SS, LT, ZL1, LS, LT1 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | V6 |
Liter | 3.6 |
CID | 222 |
Engine Size | 3.6L/222 |
Engine Family | GM V6 |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in. In/2.75 in. Out Mufflers/Hardware/4.5 in. Single Round Rolled Angle-Cut Lined Tips; Single Split Rear Exit; Non-NPP; |
Engine VIN Code | S |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | V6 |
Liter | 3.6 |
CID | 222 |
Engine Size | 3.6L/222 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in. In/2.75 in. Out Mufflers/Hardware/4.5 in. Single Round Rolled Angle-Cut Lined Tips; Single Split Rear Exit; Non-NPP; |
Engine VIN Code | S |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2016 |
Ending Year | 2023 |
Engine Type | V6 |
Liter | 3.6 |
CID | 222 |
Engine Size | 3.6L/222 |
Engine Family | GM V6 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in. In/2.75 in. Out Mufflers/Hardware/4.5 in. Single Round Rolled Angle-Cut Lined Tips; Single Split Rear Exit; Non-NPP; |
Engine VIN Code | S |
Axle-Back System
This system is for vehicles that come from the factory with single tips and are NOT equipped with Dual Mode Exhaust (NPP) valves. This system features 4.5" polished T-304 stainless steel tips. BORLA(r) Cat-Back(tm) & Axle-back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(r) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA(r) stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
S-Type Axle-Back Exhaust System 2016-2023 Chevrolet Camaro LT 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Single Split Rear Exit WITHOUT Dual Mode Exhaust (NPP) Valves.
2016-2023 Chevrolet Camaro LT 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Single Split Rear Exit WITHOUT Dual Mode Exhaust (NPP) Valves.
Exhaust System Kit
Exhaust System, Chevy, Axle-Back, Polished Tips, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422219280 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.50 |
Tailpipe Diameter (in.) | 2.75 in. |
Manufacturer's Part Number | 11928 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 16-17 Chevy Camaro 3.6L V6 Single Split Rear Exit S-Type Axle-Back Exhaust | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2016-2023 | Chevrolet | Camaro | SS, LT, ZL1, LS, LT1 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | V6 |
Liter | 3.6 |
CID | 222 |
Engine Size | 3.6L/222 |
Engine Family | GM V6 |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in. In/2.75 in. Out Mufflers/Hardware/4.5 in. Single Round Rolled Angle-Cut Lined Tips; Single Split Rear Exit; Non-NPP; |
Engine VIN Code | S |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2017 |
Ending Year | 2018 |
Engine Type | V6 |
Liter | 3.6 |
CID | 222 |
Engine Size | 3.6L/222 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in. In/2.75 in. Out Mufflers/Hardware/4.5 in. Single Round Rolled Angle-Cut Lined Tips; Single Split Rear Exit; Non-NPP; |
Engine VIN Code | S |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2016 |
Ending Year | 2023 |
Engine Type | V6 |
Liter | 3.6 |
CID | 222 |
Engine Size | 3.6L/222 |
Engine Family | GM V6 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in. In/2.75 in. Out Mufflers/Hardware/4.5 in. Single Round Rolled Angle-Cut Lined Tips; Single Split Rear Exit; Non-NPP; |
Engine VIN Code | S |