Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $832.59 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $832.59 fortnightly and receive your order now. More info
ExhstSysKt
Borla performance has once again proven why we have led the aftermarket performance exhaust industry for over 30 years. Airflow management and exhaust engineering is a science with which Borla has more experience than anyone in the exhaust aftermarket. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality/sound/performance gains and enhanced fuel economy. All with an easy bolt-on installation. All Borla street products carry an unsurpassed written million-mile warranty.
S-Type II Axle-Back Exhaust System 2005-2008 Chevrolet Corvette (C6) 6.0L/ 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
2005-2008 Chevrolet Corvette (C6) 6.0L/ 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible. Will Fit Vehicles With And Without NPP. BORLA(r) System Does NOT Contain NPP Valves.
Exhaust System Kit
Exhaust System, S-Type II, Rear Section, Dual, Stainless, Natural, Rear Center Exit, Chevy, 6.0L, 6.2L, Kit
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
UPC | 808422118156 |
Brand | Borla |
Notes | Includes oval shaped mufflers. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla S-Type II Axle-Back Exhaust Systems |
System Style | Rear section |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 4 |
Exit Location | Rear center |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Dual outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.00 in. |
Manufacturer's Part Number | 11815 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
Borla 05-08 Corvette Coupe/Conv 6.0L/6.2L 8cyl AT/MT 6spd S-Type II SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2008 | Chevrolet | Corvette | Base, Z06, 427 Limited Edition Z06 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CORVETTE |
Submodel | BASE |
Beginning Year | 2006 |
Ending Year | 2007 |
Engine Type | V8 |
Liter | 6.0 |
CID | 364 |
CC | 5967 |
Engine Size | 6.0L/364 |
Engine Family | Chevy small block Gen III/IV (LS-based engines) |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type II Axle-Back Exhaust System; Single 2.5in. Into Muffler Dual 2in. Out; Incl. Conn. Pipes/Mufflers/Hdw/4in. x 7in. Dual Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | U |
Universal | No |
Make | CHEVROLET |
Model | CORVETTE |
Submodel | BASE |
Beginning Year | 2006 |
Ending Year | 2007 |
Engine Type | V8 |
Liter | 6.0 |
CID | 364 |
CC | 5967 |
Engine Size | 6.0L/364 |
Engine Family | Chevy small block Gen III/IV (LS-based engines) |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type II Axle-Back Exhaust System; Single 2.5in. Into Muffler Dual 2in. Out; Incl. Conn. Pipes/Mufflers/Hdw/4in. x 7in. Dual Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | U |
Universal | No |
Make | CHEVROLET |
Model | CORVETTE |
Submodel | BASE |
Beginning Year | 2006 |
Ending Year | 2007 |
Engine Type | V8 |
Liter | 6.0 |
CID | 364 |
CC | 5967 |
Engine Size | 6.0L/364 |
Engine Family | Chevy small block Gen III/IV (LS-based engines) |
Body Style | Hatchback |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type II Axle-Back Exhaust System; Single 2.5in. Into Muffler Dual 2in. Out; Incl. Conn. Pipes/Mufflers/Hdw/4in. x 7in. Dual Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | U |
ExhstSysKt
Borla performance has once again proven why we have led the aftermarket performance exhaust industry for over 30 years. Airflow management and exhaust engineering is a science with which Borla has more experience than anyone in the exhaust aftermarket. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality/sound/performance gains and enhanced fuel economy. All with an easy bolt-on installation. All Borla street products carry an unsurpassed written million-mile warranty.
S-Type II Axle-Back Exhaust System 2005-2008 Chevrolet Corvette (C6) 6.0L/ 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
2005-2008 Chevrolet Corvette (C6) 6.0L/ 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible. Will Fit Vehicles With And Without NPP. BORLA(r) System Does NOT Contain NPP Valves.
Exhaust System Kit
Exhaust System, S-Type II, Rear Section, Dual, Stainless, Natural, Rear Center Exit, Chevy, 6.0L, 6.2L, Kit
Borla S-Type II axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type II axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies often associated with resonance or drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type II axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type II axle-back exhaust systems.
UPC | 808422118156 |
Brand | Borla |
Notes | Includes oval shaped mufflers. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla S-Type II Axle-Back Exhaust Systems |
System Style | Rear section |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 4 |
Exit Location | Rear center |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Dual outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.00 in. |
Manufacturer's Part Number | 11815 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
Borla 05-08 Corvette Coupe/Conv 6.0L/6.2L 8cyl AT/MT 6spd S-Type II SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2008 | Chevrolet | Corvette | Base, Z06, 427 Limited Edition Z06 | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CORVETTE |
Submodel | BASE |
Beginning Year | 2006 |
Ending Year | 2007 |
Engine Type | V8 |
Liter | 6.0 |
CID | 364 |
CC | 5967 |
Engine Size | 6.0L/364 |
Engine Family | Chevy small block Gen III/IV (LS-based engines) |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type II Axle-Back Exhaust System; Single 2.5in. Into Muffler Dual 2in. Out; Incl. Conn. Pipes/Mufflers/Hdw/4in. x 7in. Dual Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | U |
Universal | No |
Make | CHEVROLET |
Model | CORVETTE |
Submodel | BASE |
Beginning Year | 2006 |
Ending Year | 2007 |
Engine Type | V8 |
Liter | 6.0 |
CID | 364 |
CC | 5967 |
Engine Size | 6.0L/364 |
Engine Family | Chevy small block Gen III/IV (LS-based engines) |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type II Axle-Back Exhaust System; Single 2.5in. Into Muffler Dual 2in. Out; Incl. Conn. Pipes/Mufflers/Hdw/4in. x 7in. Dual Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | U |
Universal | No |
Make | CHEVROLET |
Model | CORVETTE |
Submodel | BASE |
Beginning Year | 2006 |
Ending Year | 2007 |
Engine Type | V8 |
Liter | 6.0 |
CID | 364 |
CC | 5967 |
Engine Size | 6.0L/364 |
Engine Family | Chevy small block Gen III/IV (LS-based engines) |
Body Style | Hatchback |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type II Axle-Back Exhaust System; Single 2.5in. Into Muffler Dual 2in. Out; Incl. Conn. Pipes/Mufflers/Hdw/4in. x 7in. Dual Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | U |