Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $388.65 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $388.65 fortnightly and receive your order now. More info
ExhstSysKt
The Borla Axle-Back system for the 2.4L 4-cylinder Toyota engine (PN 11743) delivers a 200+ cfm increase in flow and better than a significant weight savings. The Borla tC system incorporates 2.25" diameter lightweight yet durable aircraft-grade high quality T-304 stainless steel tubing with CNC mandrel bends and a straight-through free flowing wide oval muffler. It sounds awesome and is capped off with a stylish oversized Borla embossed polished T-304 stainless steel oval tip for a sharp appearance. Sound, performance and looks with an easy bolt-on installation. The advanced engineering Borla incorporates into the Scion tC is based on a long history of Toyota exhaust from racing both cars and trucks. Current NHRA sports compact standouts Titan Motorsports rely on Borla for their Toyota race and street car exhaust. Borla, your brand for over 40 years building great sounding performance exhaust backed by an unbeatable million-mile warranty.
S-Type Classic Axle-Back Exhaust System For 2005-2010 Scion TC 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 2 Door.
2005-2010 Scion TC 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 2 Door.
Exhaust System Kit
Exhaust System, S-Type, Rear Section, Single, Stainless Steel, Natural, Rear Exit, Scion, 2.4L, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422117432 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Oval |
Tip Finish | Polished |
Exhaust Type | Single |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear section |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 1 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Manufacturer's Part Number | 11743 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 05-08 Scion tC Rear Muffler | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2010 | Scion | tC | Base, Spec | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
ExhstSysKt
The Borla Axle-Back system for the 2.4L 4-cylinder Toyota engine (PN 11743) delivers a 200+ cfm increase in flow and better than a significant weight savings. The Borla tC system incorporates 2.25" diameter lightweight yet durable aircraft-grade high quality T-304 stainless steel tubing with CNC mandrel bends and a straight-through free flowing wide oval muffler. It sounds awesome and is capped off with a stylish oversized Borla embossed polished T-304 stainless steel oval tip for a sharp appearance. Sound, performance and looks with an easy bolt-on installation. The advanced engineering Borla incorporates into the Scion tC is based on a long history of Toyota exhaust from racing both cars and trucks. Current NHRA sports compact standouts Titan Motorsports rely on Borla for their Toyota race and street car exhaust. Borla, your brand for over 40 years building great sounding performance exhaust backed by an unbeatable million-mile warranty.
S-Type Classic Axle-Back Exhaust System For 2005-2010 Scion TC 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 2 Door.
2005-2010 Scion TC 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 2 Door.
Exhaust System Kit
Exhaust System, S-Type, Rear Section, Single, Stainless Steel, Natural, Rear Exit, Scion, 2.4L, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422117432 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Oval |
Tip Finish | Polished |
Exhaust Type | Single |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear section |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 1 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Manufacturer's Part Number | 11743 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 05-08 Scion tC Rear Muffler | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2010 | Scion | tC | Base, Spec | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.