Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $443.53 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $443.53 fortnightly and receive your order now. More info
ExhstSysKt
Borla Performance has once again proven why we have a led the aftermarket performance exhaust industry for over 30 years. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality; sound; performance gains; and enhanced fuel economy. All with an easy bolt on installation. All Borla street products carry an unsurpassed written million-mile warranty.
Touring Axle-Back Exhaust System For 2005-2009 Ford Mustang GT 4.6L V8/ 2007-2009 Ford Mustang Shelby GT500 5.4L V8 Supercharged Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
2005-2009 Ford Mustang GT 4.6L V8/ 2007-2009 Ford Mustang Shelby GT500 5.4L V8 Supercharged Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
Exhaust System Kit
Exhaust System, Touring, Dual, Stainless Steel, Natural, Split Rear Exit, Ford, 4.6L, Kit
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
UPC | 808422117524 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla Touring Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 11752 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
Borla 05-09 Mustang GT 4.6L V8 SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2009 | Ford | Mustang | GT, Shelby GT500, Shelby GT500KR | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | GT |
Beginning Year | 2005 |
Ending Year | 2009 |
Engine Type | V8 |
Liter | 4.6 |
CID | 281 |
Engine Size | 4.6L/281 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | Touring Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. x 12 in. Long Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | GT |
Beginning Year | 2005 |
Ending Year | 2009 |
Engine Type | V8 |
Liter | 4.6 |
CID | 281 |
Engine Size | 4.6L/281 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | Touring Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. x 12 in. Long Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | GT |
Beginning Year | 2005 |
Ending Year | 2009 |
Engine Type | V8 |
Liter | 4.6 |
CID | 281 |
Engine Size | 4.6L/281 |
Engine Family | Ford modular V8 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | Touring Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. x 12 in. Long Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | H |
ExhstSysKt
Borla Performance has once again proven why we have a led the aftermarket performance exhaust industry for over 30 years. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality; sound; performance gains; and enhanced fuel economy. All with an easy bolt on installation. All Borla street products carry an unsurpassed written million-mile warranty.
Touring Axle-Back Exhaust System For 2005-2009 Ford Mustang GT 4.6L V8/ 2007-2009 Ford Mustang Shelby GT500 5.4L V8 Supercharged Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
2005-2009 Ford Mustang GT 4.6L V8/ 2007-2009 Ford Mustang Shelby GT500 5.4L V8 Supercharged Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
Exhaust System Kit
Exhaust System, Touring, Dual, Stainless Steel, Natural, Split Rear Exit, Ford, 4.6L, Kit
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
UPC | 808422117524 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla Touring Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 11752 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
Borla 05-09 Mustang GT 4.6L V8 SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2005-2009 | Ford | Mustang | GT, Shelby GT500, Shelby GT500KR | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | GT |
Beginning Year | 2005 |
Ending Year | 2009 |
Engine Type | V8 |
Liter | 4.6 |
CID | 281 |
Engine Size | 4.6L/281 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | Touring Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. x 12 in. Long Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | GT |
Beginning Year | 2005 |
Ending Year | 2009 |
Engine Type | V8 |
Liter | 4.6 |
CID | 281 |
Engine Size | 4.6L/281 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | Touring Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. x 12 in. Long Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | GT |
Beginning Year | 2005 |
Ending Year | 2009 |
Engine Type | V8 |
Liter | 4.6 |
CID | 281 |
Engine Size | 4.6L/281 |
Engine Family | Ford modular V8 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | Touring Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. x 12 in. Long Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | H |