Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $314.58 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $314.58 fortnightly and receive your order now. More info
ExhstSysKt
This system utilizes Borlas patented multi-core muffler design to provide the highest exhaust flow and an aggressive sound without any uncomfortable resonance in the cabin.
S-Type Axle-Back Exhaust System For 2008-2011 Mitsubishi Lancer 2.0L/ 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 4 Door.
2008-2011 Mitsubishi Lancer 2.0L/ 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 4 Door.
Exhaust System Kit
Exhaust System, S-Type, Rear Section, Single, Stainless Steel, Aluminized/Polished, Rear Exit, Mitsubishi, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422117821 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Single |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Rear |
Muffler Style | Turbo |
System Finish | Aluminized/Polished |
Inlet Quantity | 1 |
Tip Edge Style | Rolled edge, double-wall |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Manufacturer's Part Number | 11782 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 08-11 Mitsubishi Lancer DE/ES/GTS SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2008-2011 | Mitsubishi | Lancer | DE, ES, GTS, Evolution MR, Evolution GSR, Ralliart, Evolution MR Touring, Ralliart Sportback, GTS Sportback, Evolution SE, ES Sportback | US |
1997-1998 | Subaru | Legacy | GT | US |
Please note that this is a fitment GUIDE only. If you have any queries about specific fitments, please contact us for clarification, as manufacturers may make variants and alterations during year model revisions.
ExhstSysKt
This system utilizes Borlas patented multi-core muffler design to provide the highest exhaust flow and an aggressive sound without any uncomfortable resonance in the cabin.
S-Type Axle-Back Exhaust System For 2008-2011 Mitsubishi Lancer 2.0L/ 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 4 Door.
2008-2011 Mitsubishi Lancer 2.0L/ 2.4L 4 Cyl.. Automatic/ Manual Transmission Front Wheel Drive 4 Door.
Exhaust System Kit
Exhaust System, S-Type, Rear Section, Single, Stainless Steel, Aluminized/Polished, Rear Exit, Mitsubishi, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422117821 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Single |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Rear |
Muffler Style | Turbo |
System Finish | Aluminized/Polished |
Inlet Quantity | 1 |
Tip Edge Style | Rolled edge, double-wall |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Manufacturer's Part Number | 11782 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 08-11 Mitsubishi Lancer DE/ES/GTS SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2008-2011 | Mitsubishi | Lancer | DE, ES, GTS, Evolution MR, Evolution GSR, Ralliart, Evolution MR Touring, Ralliart Sportback, GTS Sportback, Evolution SE, ES Sportback | US |
1997-1998 | Subaru | Legacy | GT | US |
Please note that this is a fitment GUIDE only. If you have any queries about specific fitments, please contact us for clarification, as manufacturers may make variants and alterations during year model revisions.