Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $580.60 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $580.60 fortnightly and receive your order now. More info
ExhstSysKt
Borla Performance has once again proven why we have a led the aftermarket performance exhaust industry for over 30 years. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality; sound; performance gains; and enhanced fuel economy. All with an easy bolt on installation. All Borla street products carry an unsurpassed written million-mile warranty.
S-Type Axle-Back Exhaust System For 2014-2015 Chevrolet Camaro 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door (EXCEPT RS with Dual Mode exhaust).
2014-2015 Chevrolet Camaro 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door (except RS with Dual Mode exhaust)
Exhaust System Kit
Exhaust System, Rear Section, Touring, Dual, Stainless Steel, Natural, Split Rear Exit, Chevy, 3.6L, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422118453 |
Brand | Borla |
Notes | Will not fit models with dual mode exhaust RS package. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Manufacturer's Part Number | 11845 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 14-15 Chevy Camaro 3.6L V6 RWD Single Split Rr Exit Touring Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2014-2015 | Chevrolet | Camaro | LS, LT | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |
ExhstSysKt
Borla Performance has once again proven why we have a led the aftermarket performance exhaust industry for over 30 years. Borla Performance Industries; the original pioneers of high quality; austinetic stainless steel free flow exhaust utilizes patented award and race winning technology to deliver quality; sound; performance gains; and enhanced fuel economy. All with an easy bolt on installation. All Borla street products carry an unsurpassed written million-mile warranty.
S-Type Axle-Back Exhaust System For 2014-2015 Chevrolet Camaro 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door (EXCEPT RS with Dual Mode exhaust).
2014-2015 Chevrolet Camaro 3.6L V6 Automatic/ Manual Transmission Rear Wheel Drive 2 Door (except RS with Dual Mode exhaust)
Exhaust System Kit
Exhaust System, Rear Section, Touring, Dual, Stainless Steel, Natural, Split Rear Exit, Chevy, 3.6L, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422118453 |
Brand | Borla |
Notes | Will not fit models with dual mode exhaust RS package. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Manufacturer's Part Number | 11845 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 14-15 Chevy Camaro 3.6L V6 RWD Single Split Rr Exit Touring Exhaust (rear section only) | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2014-2015 | Chevrolet | Camaro | LS, LT | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LT |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |