Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $312.98 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $312.98 fortnightly and receive your order now. More info
Axle-Back System
The BORLA(r) Axle-Back system for the fifth generation Forester is tailored specifically for the 2.5L Boxer engine. It provides a more aggressive sound over the stock system without adding any drone. The 11966 weighs less than the factory system, and features a 3.5" polished T-304 stainless steel tip. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. System bolts directly to the O.E. mounting points for ease of installation. A black tip is also available on system 11966CB., System Features:, Axle-Back System, 3.5" Polished T-304 Stainless Steel Tip, S-Type Sound Level, No-Drone, T-304 Stainless Steel Construction, Bolt-On Installation, Million Mile Warranty, Each BORLA(r) Exhaust System is built from Premium T-304 Stainless Steel to give you the absolute Best in Performance and durability.
S-Type Axle-Back Exhaust System 2019-2023 Subaru Forester 2.5L 4 Cyl.. Automatic Transmission All Wheel Drive 4 Door SUV.
2019-2023 Subaru Forester 2.5L 4 Cyl.. Automatic Transmission All Wheel Drive 4 Door SUV.
Exhaust System Kit
Exhaust System, S-Type, Axle-Back, Single, Stainless Steel, Natural, Rear Exit, Polished Tip, Subaru, 2.5L, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422119665 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Single |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 1 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Manufacturer's Part Number | 11966 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 19-20 Subaru Forester 2.5L S-Type Rear Section | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2019-2023 | Subaru | Forester | Sport, Limited, Premium, Touring, Base, Wilderness | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | SUBARU |
Model | FORESTER |
Submodel | 2.5I |
Beginning Year | 2019 |
Ending Year | 2020 |
Engine Type | H4 |
Liter | 2.5 |
CID | 152 |
CC | 2498 |
Engine Size | 2.5L/2498cc |
Engine Family | Subaru 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic CVT |
Drivetrain | AWD |
Application Notes | S-Type Axle-Back Exhaust System; 2 in. Pipe; 6 x 3.5 in. Single Rolled Angle Cut Tip; Single Right Rear Exit; T-304 Stainless Steel; |
Universal | No |
Make | SUBARU |
Model | FORESTER |
Submodel | BASE |
Beginning Year | 2019 |
Ending Year | 2023 |
Engine Type | H4 |
Liter | 2.5 |
CID | 152 |
CC | 2498 |
Engine Size | 2.5L/2498cc |
Engine Family | Subaru 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic CVT |
Drivetrain | AWD |
Application Notes | S-Type Axle-Back Exhaust System; 2 in. Pipe; 6 x 3.5 in. Single Rolled Angle Cut Tip; Single Right Rear Exit; T-304 Stainless Steel; |
Universal | No |
Make | SUBARU |
Model | FORESTER |
Submodel | BLACK EDITION |
Beginning Year | 2023 |
Ending Year | 2023 |
Engine Type | H4 |
Liter | 2.5 |
CID | 152 |
CC | 2498 |
Engine Size | 2.5L/2498cc |
Engine Family | Subaru 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic CVT |
Drivetrain | AWD |
Application Notes | S-Type Axle-Back Exhaust System; 2 in. Pipe; 6 x 3.5 in. Single Rolled Angle Cut Tip; Single Right Rear Exit; T-304 Stainless Steel; |
Axle-Back System
The BORLA(r) Axle-Back system for the fifth generation Forester is tailored specifically for the 2.5L Boxer engine. It provides a more aggressive sound over the stock system without adding any drone. The 11966 weighs less than the factory system, and features a 3.5" polished T-304 stainless steel tip. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. System bolts directly to the O.E. mounting points for ease of installation. A black tip is also available on system 11966CB., System Features:, Axle-Back System, 3.5" Polished T-304 Stainless Steel Tip, S-Type Sound Level, No-Drone, T-304 Stainless Steel Construction, Bolt-On Installation, Million Mile Warranty, Each BORLA(r) Exhaust System is built from Premium T-304 Stainless Steel to give you the absolute Best in Performance and durability.
S-Type Axle-Back Exhaust System 2019-2023 Subaru Forester 2.5L 4 Cyl.. Automatic Transmission All Wheel Drive 4 Door SUV.
2019-2023 Subaru Forester 2.5L 4 Cyl.. Automatic Transmission All Wheel Drive 4 Door SUV.
Exhaust System Kit
Exhaust System, S-Type, Axle-Back, Single, Stainless Steel, Natural, Rear Exit, Polished Tip, Subaru, 2.5L, Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422119665 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Single |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 1 |
Exit Location | Rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 1 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Manufacturer's Part Number | 11966 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 19-20 Subaru Forester 2.5L S-Type Rear Section | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2019-2023 | Subaru | Forester | Sport, Limited, Premium, Touring, Base, Wilderness | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | SUBARU |
Model | FORESTER |
Submodel | 2.5I |
Beginning Year | 2019 |
Ending Year | 2020 |
Engine Type | H4 |
Liter | 2.5 |
CID | 152 |
CC | 2498 |
Engine Size | 2.5L/2498cc |
Engine Family | Subaru 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic CVT |
Drivetrain | AWD |
Application Notes | S-Type Axle-Back Exhaust System; 2 in. Pipe; 6 x 3.5 in. Single Rolled Angle Cut Tip; Single Right Rear Exit; T-304 Stainless Steel; |
Universal | No |
Make | SUBARU |
Model | FORESTER |
Submodel | BASE |
Beginning Year | 2019 |
Ending Year | 2023 |
Engine Type | H4 |
Liter | 2.5 |
CID | 152 |
CC | 2498 |
Engine Size | 2.5L/2498cc |
Engine Family | Subaru 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic CVT |
Drivetrain | AWD |
Application Notes | S-Type Axle-Back Exhaust System; 2 in. Pipe; 6 x 3.5 in. Single Rolled Angle Cut Tip; Single Right Rear Exit; T-304 Stainless Steel; |
Universal | No |
Make | SUBARU |
Model | FORESTER |
Submodel | BLACK EDITION |
Beginning Year | 2023 |
Ending Year | 2023 |
Engine Type | H4 |
Liter | 2.5 |
CID | 152 |
CC | 2498 |
Engine Size | 2.5L/2498cc |
Engine Family | Subaru 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic CVT |
Drivetrain | AWD |
Application Notes | S-Type Axle-Back Exhaust System; 2 in. Pipe; 6 x 3.5 in. Single Rolled Angle Cut Tip; Single Right Rear Exit; T-304 Stainless Steel; |