Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $587.73 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $587.73 fortnightly and receive your order now. More info
Axle-Back System
The BORLA team has created a system especially for the 2.3L Ford Bronco. This Axle-Back exhaust system is engineered for performance and has our mild Touring sound with no drone. This exhaust system features a 2.5" inlet that flows into a 2.75" Inlet pipe and exits via dual 2.5" diameter tail pipes with 4" polished T-304 stainless steel exhaust tips. A system that is black coated T-304 stainless steel including the tips, is also available. Our custom muffler hanger design moves the hanger out of sight for a clean appearance. T-304 stainless steel construction provides additional durability over the stock exhaust. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Give your Bronco a boost in performance and sound, bolt on a BORLA. All BORLA Cat-Back and Axle-Back systems are made in the USA and are covered by our Million-Mile warranty. System Features: Axle-Back Exhaust System Touring Sound Level 2.5" Inlet Flows Into 2.75" Muffler Inlet & Dual 2.5" Tail Pipes No-Drone 4" Polished T-304 Stainless Steel Tips Million Mile Warranty
Touring Axle-Back Exhaust System 2021-2024 Ford Bronco 2.3L 4 Cyl. Automatic/ Manual Transmission 4 Wheel Drive 2 & 4 Door.
2021-2024 Ford Bronco 2.3L 4 Cyl. Automatic/ Manual Transmission 4 Wheel Drive 2 & 4 Door.
Exhaust System Kit
Exhaust System, Touring, Axle Back, 304 Stainless Steel, Natural, Split Rear, Ford, Bronco, 2.3L, Kit
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
UPC | 808422119733 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Single in/Dual out |
Product Line | Borla Touring Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Perforated tube with packing |
System Finish | Natural |
Inlet Quantity | 1 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Muffler Configuration | Single inlet/Dual outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 11973 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.75 in. |
Borla 21-22 Ford Bronco 2.3L 4WD Touring Axle Back Exhaust w/ Bright Chrome Tips | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2021-2023 | Ford | Bronco | Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition, Raptor, Everglades, Heritage Edition | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | FORD |
Model | BRONCO |
Submodel | BADLANDS |
Beginning Year | 2021 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.3 |
CID | 140 |
CC | 2300 |
Engine Size | 2.3L/140 |
Engine Family | Ford 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | AWD |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | BRONCO |
Submodel | BADLANDS |
Beginning Year | 2021 |
Ending Year | 2022 |
Engine Type | L4 |
Liter | 2.3 |
CID | 140 |
CC | 2300 |
Engine Size | 2.3L/140 |
Engine Family | Ford 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | 4WD |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | BRONCO |
Submodel | BADLANDS |
Beginning Year | 2021 |
Ending Year | 2022 |
Engine Type | L4 |
Liter | 2.3 |
CID | 140 |
CC | 2300 |
Engine Size | 2.3L/140 |
Engine Family | Ford 4-cylinder |
Body Style | Sport Utility |
Transmission | Manual |
Drivetrain | 4WD |
Engine VIN Code | H |
Axle-Back System
The BORLA team has created a system especially for the 2.3L Ford Bronco. This Axle-Back exhaust system is engineered for performance and has our mild Touring sound with no drone. This exhaust system features a 2.5" inlet that flows into a 2.75" Inlet pipe and exits via dual 2.5" diameter tail pipes with 4" polished T-304 stainless steel exhaust tips. A system that is black coated T-304 stainless steel including the tips, is also available. Our custom muffler hanger design moves the hanger out of sight for a clean appearance. T-304 stainless steel construction provides additional durability over the stock exhaust. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Give your Bronco a boost in performance and sound, bolt on a BORLA. All BORLA Cat-Back and Axle-Back systems are made in the USA and are covered by our Million-Mile warranty. System Features: Axle-Back Exhaust System Touring Sound Level 2.5" Inlet Flows Into 2.75" Muffler Inlet & Dual 2.5" Tail Pipes No-Drone 4" Polished T-304 Stainless Steel Tips Million Mile Warranty
Touring Axle-Back Exhaust System 2021-2024 Ford Bronco 2.3L 4 Cyl. Automatic/ Manual Transmission 4 Wheel Drive 2 & 4 Door.
2021-2024 Ford Bronco 2.3L 4 Cyl. Automatic/ Manual Transmission 4 Wheel Drive 2 & 4 Door.
Exhaust System Kit
Exhaust System, Touring, Axle Back, 304 Stainless Steel, Natural, Split Rear, Ford, Bronco, 2.3L, Kit
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
UPC | 808422119733 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Single in/Dual out |
Product Line | Borla Touring Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Perforated tube with packing |
System Finish | Natural |
Inlet Quantity | 1 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | One |
Hardware Included | Yes |
Muffler Configuration | Single inlet/Dual outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 11973 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.75 in. |
Borla 21-22 Ford Bronco 2.3L 4WD Touring Axle Back Exhaust w/ Bright Chrome Tips | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
2021-2023 | Ford | Bronco | Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition, Raptor, Everglades, Heritage Edition | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year revisions, along with regional variations. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Make | FORD |
Model | BRONCO |
Submodel | BADLANDS |
Beginning Year | 2021 |
Ending Year | 2021 |
Engine Type | L4 |
Liter | 2.3 |
CID | 140 |
CC | 2300 |
Engine Size | 2.3L/140 |
Engine Family | Ford 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | AWD |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | BRONCO |
Submodel | BADLANDS |
Beginning Year | 2021 |
Ending Year | 2022 |
Engine Type | L4 |
Liter | 2.3 |
CID | 140 |
CC | 2300 |
Engine Size | 2.3L/140 |
Engine Family | Ford 4-cylinder |
Body Style | Sport Utility |
Transmission | Automatic |
Drivetrain | 4WD |
Engine VIN Code | H |
Universal | No |
Make | FORD |
Model | BRONCO |
Submodel | BADLANDS |
Beginning Year | 2021 |
Ending Year | 2022 |
Engine Type | L4 |
Liter | 2.3 |
CID | 140 |
CC | 2300 |
Engine Size | 2.3L/140 |
Engine Family | Ford 4-cylinder |
Body Style | Sport Utility |
Transmission | Manual |
Drivetrain | 4WD |
Engine VIN Code | H |