Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $547.06 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $547.06 fortnightly and receive your order now. More info
This is Borlas® complete Cat-Back © system including X pipe and ATAK mufflers for the Camaro SS equipped with factory ground effects. BORLA® has developed a revolutionary new exhaust technology that enables our engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100 of the power-adding capabilities of BORLAs patented multicore design
ATAK(r) Axle-Back Exhaust System For 2015-2017 Ford Mustang GT/ GT Convertible 5.0L, Automatic/ Manual Transmission Rear Wheel Drive 2 Door.
2015-2017 Ford Mustang GT/ GT Convertible 5.0L, Automatic/ Manual Transmission Rear Wheel Drive 2 Door.
Exhaust System Kit
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems.
ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound.
Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation.
Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
UPC | 808422118958 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla ATAK Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 11895 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | BASE |
Beginning Year | 2016 |
Ending Year | 2016 |
Engine Type | V8 |
Liter | 5.0 |
CID | 302 |
CC | 4951 |
Engine Size | 5.0L/302 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | ATAK Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Split Rear Exit; |
Engine VIN Code | F |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | BASE |
Beginning Year | 2016 |
Ending Year | 2016 |
Engine Type | V8 |
Liter | 5.0 |
CID | 302 |
CC | 4951 |
Engine Size | 5.0L/302 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | ATAK Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Split Rear Exit; |
Engine VIN Code | F |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | BASE |
Beginning Year | 2016 |
Ending Year | 2016 |
Engine Type | V8 |
Liter | 5.0 |
CID | 302 |
CC | 4951 |
Engine Size | 5.0L/302 |
Engine Family | Ford modular V8 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | ATAK Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Split Rear Exit; |
Borla Atak S Rear Section 15-17 Ford Mustang GT 5.0L V8 MT/AT 2.5in pipe 4in tip | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2015 | Ford | Mustang | GT Premium | US |
2015 | Ford | Mustang | EcoBoost | US |
2015 | Ford | Mustang | Shelby GT350 | US |
2015 | Ford | Mustang | Shelby GT350R | US |
2015 | Ford | Mustang | EcoBoost Premium | US |
2015 | Ford | Mustang | V6 | US |
2015 | Ford | Mustang | GT 50 Years Limited Edition | US |
2015 | Ford | Mustang | GT | US |
2016 | Ford | Mustang | Shelby GT350R | US |
2016 | Ford | Mustang | GT | US |
2016 | Ford | Mustang | GT Premium | US |
2016 | Ford | Mustang | V6 | US |
2016 | Ford | Mustang | EcoBoost Premium | US |
2016 | Ford | Mustang | EcoBoost | US |
2016 | Ford | Mustang | Shelby GT350 | US |
2017 | Ford | Mustang | EcoBoost | US |
2017 | Ford | Mustang | EcoBoost Premium | US |
2017 | Ford | Mustang | Shelby GT350 | US |
2017 | Ford | Mustang | Shelby GT350R | US |
2017 | Ford | Mustang | V6 | US |
2017 | Ford | Mustang | GT Premium | US |
2017 | Ford | Mustang | GT | US |
This is Borlas® complete Cat-Back © system including X pipe and ATAK mufflers for the Camaro SS equipped with factory ground effects. BORLA® has developed a revolutionary new exhaust technology that enables our engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100 of the power-adding capabilities of BORLAs patented multicore design
ATAK(r) Axle-Back Exhaust System For 2015-2017 Ford Mustang GT/ GT Convertible 5.0L, Automatic/ Manual Transmission Rear Wheel Drive 2 Door.
2015-2017 Ford Mustang GT/ GT Convertible 5.0L, Automatic/ Manual Transmission Rear Wheel Drive 2 Door.
Exhaust System Kit
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems.
ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound.
Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation.
Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
UPC | 808422118958 |
Brand | Borla |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla ATAK Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50 in. |
Manufacturer's Part Number | 11895 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.50 in. |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | BASE |
Beginning Year | 2016 |
Ending Year | 2016 |
Engine Type | V8 |
Liter | 5.0 |
CID | 302 |
CC | 4951 |
Engine Size | 5.0L/302 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | ATAK Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Split Rear Exit; |
Engine VIN Code | F |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | BASE |
Beginning Year | 2016 |
Ending Year | 2016 |
Engine Type | V8 |
Liter | 5.0 |
CID | 302 |
CC | 4951 |
Engine Size | 5.0L/302 |
Engine Family | Ford modular V8 |
Body Style | Convertible |
Transmission | Manual |
Drivetrain | RWD |
Application Notes | ATAK Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Split Rear Exit; |
Engine VIN Code | F |
Universal | No |
Make | FORD |
Model | MUSTANG |
Submodel | BASE |
Beginning Year | 2016 |
Ending Year | 2016 |
Engine Type | V8 |
Liter | 5.0 |
CID | 302 |
CC | 4951 |
Engine Size | 5.0L/302 |
Engine Family | Ford modular V8 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | ATAK Axle-Back Exhaust System; 2.5 in.; Incl. Mufflers/Hardware/4 in. Single Round Rolled Angle-Cut Tip; Single Split Rear Exit; |
Borla Atak S Rear Section 15-17 Ford Mustang GT 5.0L V8 MT/AT 2.5in pipe 4in tip | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2015 | Ford | Mustang | GT Premium | US |
2015 | Ford | Mustang | EcoBoost | US |
2015 | Ford | Mustang | Shelby GT350 | US |
2015 | Ford | Mustang | Shelby GT350R | US |
2015 | Ford | Mustang | EcoBoost Premium | US |
2015 | Ford | Mustang | V6 | US |
2015 | Ford | Mustang | GT 50 Years Limited Edition | US |
2015 | Ford | Mustang | GT | US |
2016 | Ford | Mustang | Shelby GT350R | US |
2016 | Ford | Mustang | GT | US |
2016 | Ford | Mustang | GT Premium | US |
2016 | Ford | Mustang | V6 | US |
2016 | Ford | Mustang | EcoBoost Premium | US |
2016 | Ford | Mustang | EcoBoost | US |
2016 | Ford | Mustang | Shelby GT350 | US |
2017 | Ford | Mustang | EcoBoost | US |
2017 | Ford | Mustang | EcoBoost Premium | US |
2017 | Ford | Mustang | Shelby GT350 | US |
2017 | Ford | Mustang | Shelby GT350R | US |
2017 | Ford | Mustang | V6 | US |
2017 | Ford | Mustang | GT Premium | US |
2017 | Ford | Mustang | GT | US |