Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $148.66 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $148.66 fortnightly and receive your order now. More info
Control Arm
Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Ultra Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of 'Me Too' Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA's. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions. For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools
Ultra Series Control Arm Set; Lower; 44 Percent Lighter Than OEM; Incl. Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 7075-T6 Aluminum; Clear Anodized; Set of 2;
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Lower Control Arm, Ultra Series Rear Aluminum Lower Control Arm Raw 88-95 Honda Civic Ex EG
Skunk2 Racing Ultra control arms are game changers for the hardcore racer or discerning enthusiast. Benchmarking off their previous LCA design, Ultras are lighter, stronger, and more durable without increased noise, vibration, or harshness (NVH). This was accomplished via the use of a specific combination of bushings, the latest materials, and a high-precision spherical bearing. Choose the rear lower control arms designed for your vehicle. Key features: * CNC-machined from forged 7075 T-6 aluminum * Tensile strength of over 78,000 psi * Fatigue strength of 23,000 psi for 500 million cycles * 44 percent lighter than OEM arms * 19 percent EG/24 percent EK lighter than original S2 LCA design * 27 percent EG/49 percent EK stronger than original S2 LCA design * Outboard spherical bearing to reduce bushing twist * Tuned polyurethane inboard bushing to dampen NVH * Delrin® shock mount bushings for improved shock performance
UPC | 873265009091 |
Brand | Skunk 2 |
Quantity | Sold as a pair. |
Part Type | Control Arms |
Adjustable | No |
Product Line | Skunk2 Racing Ultra Control Arms |
Bushing Material | Polyurethane/Delrin® |
Bushings Included | Yes |
Control Arm Color | Clearcoat |
Control Arm Style | Billet |
Hardware Included | No |
Ball Joint Included | Yes |
Control Arm Material | Forged aluminum |
Manufacturer's Part Number | 542-05-2105 |
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Clear | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
1990-2001 | Acura | Integra | GS, LS, RS, GS-R | US |
1988-1991 | Honda | CRX | HF, Si, DX | US |
1988-1995 | Honda | Civic | Base, DX, LX, Si, EX, CX, VX | US |
1993-1997 | Honda | Civic del Sol | S, Si, VTEC | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year or regional revisions. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Control Arm Position | Rear Left Lower |
Make | ACURA |
Model | INTEGRA |
Submodel | GS-R |
Beginning Year | 1992 |
Ending Year | 1993 |
Drivetrain | FWD |
Engine Type | L4 |
Engine Size | 1.7L/1678cc |
Engine Family | Honda/Acura 4-cylinder |
Universal | No |
Control Arm Position | Rear Left Lower |
Make | ACURA |
Model | INTEGRA |
Submodel | GS-R |
Beginning Year | 1994 |
Ending Year | 2001 |
Drivetrain | FWD |
Engine Type | L4 |
Engine Size | 1.8L/1797cc |
Engine Family | Honda/Acura 4-cylinder |
Universal | No |
Control Arm Position | Rear Left Lower |
Make | ACURA |
Model | INTEGRA |
Submodel | GS |
Beginning Year | 1990 |
Ending Year | 1993 |
Drivetrain | FWD |
Engine Type | L4 |
Engine Size | 1.8L/1834cc |
Engine Family | Honda/Acura 4-cylinder |
Control Arm
Skunk2 has done it again. While others are busy imitating our LCA's, Skunk2 engineers have spent years of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of its Ultra Series Lower Control Arms for the '88-'95 Civic/ CRX and '90-'01 Integra. The Ultra Series LCA's are based off of the same technology the company's been using in its own race cars for 20 years. Skunk2's Rear Lower Control Arms are direct replacements, maintain OEM suspension geometry, and are ideal for street and race applications. The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of 'Me Too' Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA's. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA's. Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions. For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools
Ultra Series Control Arm Set; Lower; 44 Percent Lighter Than OEM; Incl. Spherical Wheel Hub Joint/Elastomeric Bushings; Forged 7075-T6 Aluminum; Clear Anodized; Set of 2;
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Lower Control Arm, Ultra Series Rear Aluminum Lower Control Arm Raw 88-95 Honda Civic Ex EG
Skunk2 Racing Ultra control arms are game changers for the hardcore racer or discerning enthusiast. Benchmarking off their previous LCA design, Ultras are lighter, stronger, and more durable without increased noise, vibration, or harshness (NVH). This was accomplished via the use of a specific combination of bushings, the latest materials, and a high-precision spherical bearing. Choose the rear lower control arms designed for your vehicle. Key features: * CNC-machined from forged 7075 T-6 aluminum * Tensile strength of over 78,000 psi * Fatigue strength of 23,000 psi for 500 million cycles * 44 percent lighter than OEM arms * 19 percent EG/24 percent EK lighter than original S2 LCA design * 27 percent EG/49 percent EK stronger than original S2 LCA design * Outboard spherical bearing to reduce bushing twist * Tuned polyurethane inboard bushing to dampen NVH * Delrin® shock mount bushings for improved shock performance
UPC | 873265009091 |
Brand | Skunk 2 |
Quantity | Sold as a pair. |
Part Type | Control Arms |
Adjustable | No |
Product Line | Skunk2 Racing Ultra Control Arms |
Bushing Material | Polyurethane/Delrin® |
Bushings Included | Yes |
Control Arm Color | Clearcoat |
Control Arm Style | Billet |
Hardware Included | No |
Ball Joint Included | Yes |
Control Arm Material | Forged aluminum |
Manufacturer's Part Number | 542-05-2105 |
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Clear | ||||
---|---|---|---|---|
Year Range | Make | Model | Submodels | Region |
1990-2001 | Acura | Integra | GS, LS, RS, GS-R | US |
1988-1991 | Honda | CRX | HF, Si, DX | US |
1988-1995 | Honda | Civic | Base, DX, LX, Si, EX, CX, VX | US |
1993-1997 | Honda | Civic del Sol | S, Si, VTEC | US |
Please note that this information serves as a fitment guide only. For specific fitment questions or clarifications, please contact us, as manufacturers may introduce variations and modifications during model year or regional revisions. While we strive to provide accurate data, fitment details may vary by region; therefore, compatibility outside the listed region and submodel variant cannot be guaranteed.
Application Data | |
---|---|
Universal | No |
Control Arm Position | Rear Left Lower |
Make | ACURA |
Model | INTEGRA |
Submodel | GS-R |
Beginning Year | 1992 |
Ending Year | 1993 |
Drivetrain | FWD |
Engine Type | L4 |
Engine Size | 1.7L/1678cc |
Engine Family | Honda/Acura 4-cylinder |
Universal | No |
Control Arm Position | Rear Left Lower |
Make | ACURA |
Model | INTEGRA |
Submodel | GS-R |
Beginning Year | 1994 |
Ending Year | 2001 |
Drivetrain | FWD |
Engine Type | L4 |
Engine Size | 1.8L/1797cc |
Engine Family | Honda/Acura 4-cylinder |
Universal | No |
Control Arm Position | Rear Left Lower |
Make | ACURA |
Model | INTEGRA |
Submodel | GS |
Beginning Year | 1990 |
Ending Year | 1993 |
Drivetrain | FWD |
Engine Type | L4 |
Engine Size | 1.8L/1834cc |
Engine Family | Honda/Acura 4-cylinder |