Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $248.93 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $248.93 fortnightly and receive your order now. More info
Stage 1 Boost Cooler
Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 1 Boost CoolerForced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line; 4AN Fittings).
All Forced Induction Gasoline Engines
Nitrous Oxide Injection System Kit
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Water/Methanol Injection Systems, Stage 1 Boost Cooler, Stainless Steel Braided Line, Kit
In gasoline engines, as with any intercooler, Stage-1 Boost Coolers suppress detonation, so more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big hp! They're designed for use in gasoline (6-15 psig boost) supercharged/turbocharged vehicles. Systems include: * 300 psi high-volume pump * Adjustable boost pressure switch * 3 qt. reservoir * Two nozzles sized to your FWHP and boost levels * Bosch relay and all the electrical parts * Fittings, tubing, etc. for installation
Brand | Snow Performance |
Manufacturer's Part Number | 201-BRD |
Part Type | Water/Methanol Injection Systems |
Product Line | Snow Performance Boost Cooler Stage-1 Water/Methanol Injection Systems |
UPC | 653374500043 |
Water Injection Pump Included | Yes |
Wiring Harness Included | Yes |
Boost Pressure Reference Switch Included | Yes |
Reservoir Included | Yes |
Reservoir Volume | 3 quart |
Quantity | Sold as a kit. |
Notes | Kit also includes 300 psi pump, braided stainless steel line, fittings, nozzle, sealer, relay harness, and all required hardware. |
No specific fitment data available for this part. For clarification, please contact us.
Stage 1 Boost Cooler
Race gas quality fuel on pump gas! Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! The Snow Performance Stage 1 Boost Cooler water-methanol injection kit is available for all forced induction applications (supercharged/turbocharged) and uses a adjustable boost switch to inject a fixed amount of water-methanol into the system until boost goes below the switch set point. Proven to deliver 30-70 HP increases to all forced induction applications! This makes it a good choice for low to medium boost setups (1-15 PSI) and vehicles with a positive displacement supercharger looking for an octane enhancement and cooler intake charge. Activation can also be set up through any other user-chosen switch, such as a full throttle switch, nitrous switch, etc. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 1 Boost CoolerForced Induction Water-Methanol Injection Kit (Stainless Steel Braided Line; 4AN Fittings).
All Forced Induction Gasoline Engines
Nitrous Oxide Injection System Kit
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Water/Methanol Injection Systems, Stage 1 Boost Cooler, Stainless Steel Braided Line, Kit
In gasoline engines, as with any intercooler, Stage-1 Boost Coolers suppress detonation, so more power-producing boost and timing can be utilized. Water, with its high latent heat of vaporization, cools the intake charge and combustion. Methanol cools the charge and combustion, but also acts like an extremely high-octane fuel (some researchers claim as high as 120 octane) and adds more oxygen to combustion. These systems contain everything needed to start making big hp! They're designed for use in gasoline (6-15 psig boost) supercharged/turbocharged vehicles. Systems include: * 300 psi high-volume pump * Adjustable boost pressure switch * 3 qt. reservoir * Two nozzles sized to your FWHP and boost levels * Bosch relay and all the electrical parts * Fittings, tubing, etc. for installation
Brand | Snow Performance |
Manufacturer's Part Number | 201-BRD |
Part Type | Water/Methanol Injection Systems |
Product Line | Snow Performance Boost Cooler Stage-1 Water/Methanol Injection Systems |
UPC | 653374500043 |
Water Injection Pump Included | Yes |
Wiring Harness Included | Yes |
Boost Pressure Reference Switch Included | Yes |
Reservoir Included | Yes |
Reservoir Volume | 3 quart |
Quantity | Sold as a kit. |
Notes | Kit also includes 300 psi pump, braided stainless steel line, fittings, nozzle, sealer, relay harness, and all required hardware. |
No specific fitment data available for this part. For clarification, please contact us.