Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $461.74 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $461.74 fortnightly and receive your order now. More info
Stage 3 Boost Cooler
The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel injector pulse width to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel injector pulse width into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 3 Boost CoolerEFI 2D MAP Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line; 4AN Fittings).
All Forced Induction Gasoline Engines
Nitrous Oxide Injection System Kit
This item was designed and engineered in the USA for US domestic vehicles. While it may be suitable for vehicles outside of the USA, compatibility cannot be guaranteed. Please review the images and descriptions carefully to ensure this product meets your needs. Returns are not accepted for special order products. Contact a StreetFX agent for clarification if you are uncertain.
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Water/Methanol Injection System, Stage 3 Boost Cooler Injection Kit, Pump, 3 qt. Tank, Stainless Braided Line, -4 AN Fittings, Gas Engines, Kit
These Snow Performance Stage-3 gasoline boost cooler kits are unmatched for accuracy and adjustability in water-methanol injection systems. These systems can be used on any EFI engine--naturally aspirated or forced induction--and any forced induction application. They can read and inject according to either EFI fuel injector pulse-width or boost level, or any combination of both! Extremely easy to set up and dial in, the software creates a two-dimensional delivery map from just a few easy-to-set start and full points that you punch in. The LCD screen displays boost pressure and injector pulse width percentage, as well as water-methanol injection percentage. Quick, easy, positive adjustments are made with two push buttons. Their low-profile design allows for easy-to-view and discrete mounting. Kits include: * 300 psi high-volume pump * 3 qt. reservoir * LCD screen, push-button digital variable 2-D mapping controller * 2 nozzles to cover a wide range of horsepower * 10 ft. high-pressure tubing (1,200 psi burst) * Comprehensive instructions * All required hardware for installation
Brand | Snow Performance |
Manufacturer's Part Number | 310-BRD |
Part Type | Water/Methanol Injection Systems |
Product Line | Snow Performance Boost Cooler Stage-3 Gasoline Kits |
UPC | 653374500272 |
Water Injection Pump Included | Yes |
Wiring Harness Included | Yes |
Boost Pressure Reference Switch Included | Yes |
Reservoir Included | Yes |
Reservoir Volume | 3 quart |
Quantity | Sold as a kit. |
No specific fitment data available for this part. For clarification, please contact us.
Stage 3 Boost Cooler
The Snow Performance Stage 3 Boost Cooler brings true 2D mapped water-methanol injection delivery to your EFI (electronic fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel injector pulse width to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel injector pulse width into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage 3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling. Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle. For trunk mount options see Part# SNO-40014-BRD, SNO-40012-BRD.
Stage 3 Boost CoolerEFI 2D MAP Progressive Water-Methanol Injection Kit (Stainless Steel Braided Line; 4AN Fittings).
All Forced Induction Gasoline Engines
Nitrous Oxide Injection System Kit
This item was designed and engineered in the USA for US domestic vehicles. While it may be suitable for vehicles outside of the USA, compatibility cannot be guaranteed. Please review the images and descriptions carefully to ensure this product meets your needs. Returns are not accepted for special order products. Contact a StreetFX agent for clarification if you are uncertain.
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included items. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Water/Methanol Injection System, Stage 3 Boost Cooler Injection Kit, Pump, 3 qt. Tank, Stainless Braided Line, -4 AN Fittings, Gas Engines, Kit
These Snow Performance Stage-3 gasoline boost cooler kits are unmatched for accuracy and adjustability in water-methanol injection systems. These systems can be used on any EFI engine--naturally aspirated or forced induction--and any forced induction application. They can read and inject according to either EFI fuel injector pulse-width or boost level, or any combination of both! Extremely easy to set up and dial in, the software creates a two-dimensional delivery map from just a few easy-to-set start and full points that you punch in. The LCD screen displays boost pressure and injector pulse width percentage, as well as water-methanol injection percentage. Quick, easy, positive adjustments are made with two push buttons. Their low-profile design allows for easy-to-view and discrete mounting. Kits include: * 300 psi high-volume pump * 3 qt. reservoir * LCD screen, push-button digital variable 2-D mapping controller * 2 nozzles to cover a wide range of horsepower * 10 ft. high-pressure tubing (1,200 psi burst) * Comprehensive instructions * All required hardware for installation
Brand | Snow Performance |
Manufacturer's Part Number | 310-BRD |
Part Type | Water/Methanol Injection Systems |
Product Line | Snow Performance Boost Cooler Stage-3 Gasoline Kits |
UPC | 653374500272 |
Water Injection Pump Included | Yes |
Wiring Harness Included | Yes |
Boost Pressure Reference Switch Included | Yes |
Reservoir Included | Yes |
Reservoir Volume | 3 quart |
Quantity | Sold as a kit. |
No specific fitment data available for this part. For clarification, please contact us.