Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $17.71 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $17.71 fortnightly and receive your order now. More info
CNC machined aluminum with anodized finish. O-ring sealed. Swivels after installation.
Banjo Bolt and Fitting
Building and designing high-performance, aftermarket fuel systems and all the parts and accessories that go with them is an art that Radium Engineering has perfected since 2010.
With a sharp understanding of how fuel flow helps to create more horsepower, Radium fuel system parts and accessories deliver fuel to the injectors with ample pressure and volume. Radium's research and development department ensures your fuel system is up to the demanding task and that your engine is protected. With our help at StreetFX, we can supply all your Radium Engineering performance parts and accessories all around the world. Radium Engineering’s primary focus is in developing fuel surge tanks and PCV oil catch can systems.
In helping to prevent oil buildup in the throttle body, intercooler, and intake, Radium Engineering’s Universal Catch Cans help to raise octane and increase engine performance while also lowering hydrocarbon emissions. They are made from 6061 Billet Aluminum for assured durability.
Radium Engineering’s Universal Fuel Surge Tanks are especially useful on vehicles with insufficient fuel tank baffling; they feed the fuel rails, helping to prevent fuel starvation to the engine. Each fuel surge tank incorporates a single internal fuel pump and a fuel pressure regulator. Also, these Fuel Surge Tanks are made from CNC anodized aluminum, with interfaces sealed with O-rings.
Radium Engineering’s High Flow Fuel Filters are made from 6061 aluminum and Type-II anodized aluminum, and can be used with E85, alcohol, and other race fuels. They effectively filter out dirt, debris, and contaminants without inhibiting fuel flow; they allow high fuel pressures of over 150psi. These high-flow fuel filters have a 3 piece body with different filtration element options, i.e. cellulose paper, micro-fiberglass, fine stainless steel, and coarse stainless steel.
Other Radium Engineering products that you can get here at StreetFX include fuel pressure gauges, fuel pulse damper kits, fuel rail upgrade kits, fuel pressure regulators, venture jet pump kits, fuel system fittings and hose ends, and many more. StreetFX is a licensed vendor of Radium Engineering products, so you can count on us to supply you with all the Radium Engineering products you want. If you are not sure about which Radium Engineering products that you want, don't hesitate to drop us a line.
ORB (O-Ring Boss) ports are an industry standard and found on many automotive plumbing products. Radium Engineering AN ORB Swivel Banjo to AN adapter fittings feature anodized aluminum construction, making them lightweight and attractive. They are offered in several sizes to be used in any application using the same thread pitch O-ring port. All ORB fittings feature FKM O-rings for all oil and fuel types. Select the Radium fitting sizes you need and order them today from Summit Racing®.
Brand | Radium Engineering |
Notes | Has an installed height of 1.019 in. |
Swivel | Yes |
Quantity | Sold individually. |
Part Type | Fittings and Adapters |
Gauge Port | No |
Product Line | Radium Engineering AN ORB Swivel Banjo to AN Adapter Fittings |
Fitting Angle | 90 degree |
Fitting Color | Black anodized |
Fitting Style | Adapter |
Fitting Size 1 | -8 AN |
Fitting Size 2 | -8 AN |
O-Ring Material | FKM |
Fitting Category | AN to AN |
Fitting Material | Aluminum |
O-Rings Included | Yes |
Fitting Attachment 1 | Male AN O-ring |
Fitting Attachment 2 | Male AN |
Manufacturer's Part Number | RAD20-1000-0808 |
Compatibility & Application Information | |
---|---|
Fitting Size 1 (application) | -8 AN |
Fitting Attachment Style 1 | Male |
Fitting Size 2 (application) | -8 AN O-ring |
Fitting Attachment Style 2 | Male |
Application Notes | Has an installed height of 1.019 in. |
Fitting Size 1 (application) | -8 AN O-ring |
Fitting Attachment Style 1 | Male |
Fitting Size 2 (application) | -8 AN |
Fitting Attachment Style 2 | Male |
Application Notes | Has an installed height of 1.019 in. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
CNC machined aluminum with anodized finish. O-ring sealed. Swivels after installation.
Banjo Bolt and Fitting
Building and designing high-performance, aftermarket fuel systems and all the parts and accessories that go with them is an art that Radium Engineering has perfected since 2010.
With a sharp understanding of how fuel flow helps to create more horsepower, Radium fuel system parts and accessories deliver fuel to the injectors with ample pressure and volume. Radium's research and development department ensures your fuel system is up to the demanding task and that your engine is protected. With our help at StreetFX, we can supply all your Radium Engineering performance parts and accessories all around the world. Radium Engineering’s primary focus is in developing fuel surge tanks and PCV oil catch can systems.
In helping to prevent oil buildup in the throttle body, intercooler, and intake, Radium Engineering’s Universal Catch Cans help to raise octane and increase engine performance while also lowering hydrocarbon emissions. They are made from 6061 Billet Aluminum for assured durability.
Radium Engineering’s Universal Fuel Surge Tanks are especially useful on vehicles with insufficient fuel tank baffling; they feed the fuel rails, helping to prevent fuel starvation to the engine. Each fuel surge tank incorporates a single internal fuel pump and a fuel pressure regulator. Also, these Fuel Surge Tanks are made from CNC anodized aluminum, with interfaces sealed with O-rings.
Radium Engineering’s High Flow Fuel Filters are made from 6061 aluminum and Type-II anodized aluminum, and can be used with E85, alcohol, and other race fuels. They effectively filter out dirt, debris, and contaminants without inhibiting fuel flow; they allow high fuel pressures of over 150psi. These high-flow fuel filters have a 3 piece body with different filtration element options, i.e. cellulose paper, micro-fiberglass, fine stainless steel, and coarse stainless steel.
Other Radium Engineering products that you can get here at StreetFX include fuel pressure gauges, fuel pulse damper kits, fuel rail upgrade kits, fuel pressure regulators, venture jet pump kits, fuel system fittings and hose ends, and many more. StreetFX is a licensed vendor of Radium Engineering products, so you can count on us to supply you with all the Radium Engineering products you want. If you are not sure about which Radium Engineering products that you want, don't hesitate to drop us a line.
ORB (O-Ring Boss) ports are an industry standard and found on many automotive plumbing products. Radium Engineering AN ORB Swivel Banjo to AN adapter fittings feature anodized aluminum construction, making them lightweight and attractive. They are offered in several sizes to be used in any application using the same thread pitch O-ring port. All ORB fittings feature FKM O-rings for all oil and fuel types. Select the Radium fitting sizes you need and order them today from Summit Racing®.
Brand | Radium Engineering |
Notes | Has an installed height of 1.019 in. |
Swivel | Yes |
Quantity | Sold individually. |
Part Type | Fittings and Adapters |
Gauge Port | No |
Product Line | Radium Engineering AN ORB Swivel Banjo to AN Adapter Fittings |
Fitting Angle | 90 degree |
Fitting Color | Black anodized |
Fitting Style | Adapter |
Fitting Size 1 | -8 AN |
Fitting Size 2 | -8 AN |
O-Ring Material | FKM |
Fitting Category | AN to AN |
Fitting Material | Aluminum |
O-Rings Included | Yes |
Fitting Attachment 1 | Male AN O-ring |
Fitting Attachment 2 | Male AN |
Manufacturer's Part Number | RAD20-1000-0808 |
Compatibility & Application Information | |
---|---|
Fitting Size 1 (application) | -8 AN |
Fitting Attachment Style 1 | Male |
Fitting Size 2 (application) | -8 AN O-ring |
Fitting Attachment Style 2 | Male |
Application Notes | Has an installed height of 1.019 in. |
Fitting Size 1 (application) | -8 AN O-ring |
Fitting Attachment Style 1 | Male |
Fitting Size 2 (application) | -8 AN |
Fitting Attachment Style 2 | Male |
Application Notes | Has an installed height of 1.019 in. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.