![AfterPay](/assets/themes/2024-06-streamin/img/afterpay-logo.png?1725406900)
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $47.17 fortnightly and receive your order now. More info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $47.17 fortnightly and receive your order now. More info
This device allows implementing an ethanol content sensor into a high flow fuel line. The design has dual passages that the fuel can flow through, so there is no loss in fuel flow. Can be used on feed or return fuel lines. 10AN female ports will require adapters to match the hose in the vehicle.
Fuel Injector Rail
Building and designing high-performance, aftermarket fuel systems and all the parts and accessories that go with them is an art that Radium Engineering has perfected since 2010.
With a sharp understanding of how fuel flow helps to create more horsepower, Radium fuel system parts and accessories deliver fuel to the injectors with ample pressure and volume. Radium's research and development department ensures your fuel system is up to the demanding task and that your engine is protected. With our help at StreetFX, we can supply all your Radium Engineering performance parts and accessories all around the world. Radium Engineering’s primary focus is in developing fuel surge tanks and PCV oil catch can systems.
In helping to prevent oil buildup in the throttle body, intercooler, and intake, Radium Engineering’s Universal Catch Cans help to raise octane and increase engine performance while also lowering hydrocarbon emissions. They are made from 6061 Billet Aluminum for assured durability.
Radium Engineering’s Universal Fuel Surge Tanks are especially useful on vehicles with insufficient fuel tank baffling; they feed the fuel rails, helping to prevent fuel starvation to the engine. Each fuel surge tank incorporates a single internal fuel pump and a fuel pressure regulator. Also, these Fuel Surge Tanks are made from CNC anodized aluminum, with interfaces sealed with O-rings.
Radium Engineering’s High Flow Fuel Filters are made from 6061 aluminum and Type-II anodized aluminum, and can be used with E85, alcohol, and other race fuels. They effectively filter out dirt, debris, and contaminants without inhibiting fuel flow; they allow high fuel pressures of over 150psi. These high-flow fuel filters have a 3 piece body with different filtration element options, i.e. cellulose paper, micro-fiberglass, fine stainless steel, and coarse stainless steel.
Other Radium Engineering products that you can get here at StreetFX include fuel pressure gauges, fuel pulse damper kits, fuel rail upgrade kits, fuel pressure regulators, venture jet pump kits, fuel system fittings and hose ends, and many more. StreetFX is a licensed vendor of Radium Engineering products, so you can count on us to supply you with all the Radium Engineering products you want. If you are not sure about which Radium Engineering products that you want, don't hesitate to drop us a line.
Radium Engineering split-flow flex fuel sensor adapters allow implementing an ethanol content sensor into a high-flow fuel line. The design has dual passages that the fuel can flow through, so there is no loss in fuel flow. These adapters can be used on feed or return fuel lines. 10 AN female ports will require adapters to match the hose in the vehicle.
Brand | Radium Engineering |
Manufacturer's Part Number | 20-0589 |
Part Type | Flex Fuel Sensor Brackets and Adapters |
Product Line | Radium Engineering Split-Flow Flex Fuel Sensor Adapters |
Summit Racing Part Number | RDM-20-0589 |
Fitting Size 1 | -10 AN O-ring |
Fitting Attachment 1 | Female AN O-ring |
Fitting Size 2 | -10 AN O-ring |
Fitting Attachment 2 | Female AN O-ring |
Adapter Fitting Included | No |
Bypass | Yes |
Material | Aluminum |
Color | Black |
Mounting Bracket Included | Yes |
Quantity | Sold as a kit. |
Notes | Fittings sold separately. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
This device allows implementing an ethanol content sensor into a high flow fuel line. The design has dual passages that the fuel can flow through, so there is no loss in fuel flow. Can be used on feed or return fuel lines. 10AN female ports will require adapters to match the hose in the vehicle.
Fuel Injector Rail
Building and designing high-performance, aftermarket fuel systems and all the parts and accessories that go with them is an art that Radium Engineering has perfected since 2010.
With a sharp understanding of how fuel flow helps to create more horsepower, Radium fuel system parts and accessories deliver fuel to the injectors with ample pressure and volume. Radium's research and development department ensures your fuel system is up to the demanding task and that your engine is protected. With our help at StreetFX, we can supply all your Radium Engineering performance parts and accessories all around the world. Radium Engineering’s primary focus is in developing fuel surge tanks and PCV oil catch can systems.
In helping to prevent oil buildup in the throttle body, intercooler, and intake, Radium Engineering’s Universal Catch Cans help to raise octane and increase engine performance while also lowering hydrocarbon emissions. They are made from 6061 Billet Aluminum for assured durability.
Radium Engineering’s Universal Fuel Surge Tanks are especially useful on vehicles with insufficient fuel tank baffling; they feed the fuel rails, helping to prevent fuel starvation to the engine. Each fuel surge tank incorporates a single internal fuel pump and a fuel pressure regulator. Also, these Fuel Surge Tanks are made from CNC anodized aluminum, with interfaces sealed with O-rings.
Radium Engineering’s High Flow Fuel Filters are made from 6061 aluminum and Type-II anodized aluminum, and can be used with E85, alcohol, and other race fuels. They effectively filter out dirt, debris, and contaminants without inhibiting fuel flow; they allow high fuel pressures of over 150psi. These high-flow fuel filters have a 3 piece body with different filtration element options, i.e. cellulose paper, micro-fiberglass, fine stainless steel, and coarse stainless steel.
Other Radium Engineering products that you can get here at StreetFX include fuel pressure gauges, fuel pulse damper kits, fuel rail upgrade kits, fuel pressure regulators, venture jet pump kits, fuel system fittings and hose ends, and many more. StreetFX is a licensed vendor of Radium Engineering products, so you can count on us to supply you with all the Radium Engineering products you want. If you are not sure about which Radium Engineering products that you want, don't hesitate to drop us a line.
Radium Engineering split-flow flex fuel sensor adapters allow implementing an ethanol content sensor into a high-flow fuel line. The design has dual passages that the fuel can flow through, so there is no loss in fuel flow. These adapters can be used on feed or return fuel lines. 10 AN female ports will require adapters to match the hose in the vehicle.
Brand | Radium Engineering |
Manufacturer's Part Number | 20-0589 |
Part Type | Flex Fuel Sensor Brackets and Adapters |
Product Line | Radium Engineering Split-Flow Flex Fuel Sensor Adapters |
Summit Racing Part Number | RDM-20-0589 |
Fitting Size 1 | -10 AN O-ring |
Fitting Attachment 1 | Female AN O-ring |
Fitting Size 2 | -10 AN O-ring |
Fitting Attachment 2 | Female AN O-ring |
Adapter Fitting Included | No |
Bypass | Yes |
Material | Aluminum |
Color | Black |
Mounting Bracket Included | Yes |
Quantity | Sold as a kit. |
Notes | Fittings sold separately. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.